Évaluations - 3, GPA: 3.7 ( )

Fabricant : McCulloch Taille : 346.65 kb Nom Fichier : Langue d'enseignement:

To store your Hedgetrimmer • The Hedgetrimmer blade cover/storage holder is provided with 2 hanging slots for storing the Hedgetrimmer on the wall.(See Pic L) • Ensure the blade cover/storage holder is fitted before storage. 1. The use of 2 number 10 screws (40mm in length) and the appropriate wall fixing plugs is recommended 2. Drill 2 holes 47mm horizontally apart. 3. Fit wall plugs. 4. Fit screw ensuring enough length is avail- able for secure location into hanging slot. • Your mains cable can be stored with the blade cover/storage holder fitted. (Pic M & N) • Store in a dry place where your Hedgetrimmer is protected from damage. J K M N L 5 Caring for your Hedgetrimmer Cleaning (J) 1. Using a soft brush - remove debris from all air intakes and cutting blade. 2. Wipe over surface of your hedgetrimmer with a dry cloth. • IMPORTANT Never use water for cleaning your hed- getrimmer. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts. Lubricating the Cutting Blade For easier operation and longer life, lubricate the cutter blades before and after use. Apply the oil so that it runs between the two blades. See Pic K. At the end of the Cutting Season. 1. Clean your Hedgetrimmer thoroughly. 2. Check that all nuts and bolts are secure. 3. Visually inspect the Hedgetrimmer for any worn or damaged parts, contact your local Service Centre if any parts require replacement. To store your Hedgetrimmer • The Hedgetrimmer blade cover/storage holder is provided with 2 hanging slots for storing the Hedgetrimmer on the wall.(See Pic L) • Ensure the blade cover/storage holder is fitted before storage. 1. The use of 2 number 10 screws (40mm in length) and the appropriate wall fixing plugs is recommended 2. Drill 2 holes 47mm horizontally apart. 3. Fit wall plugs. 4. Fit screw ensuring enough length is avail- able for secure location into hanging slot. • Your mains cable can be stored with the blade cover/storage holder fitted. (Pic M & N) • Store in a dry place where your Hedgetrimmer is protected from damage. J K M N L Fault Finding Hints 6 Fails to Operate 1. Is the Power Turned On? 2. Check the fuse in the plug, if blown replace. 3. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre. Cutting blade stops under load 1. Cut at a slower pace. 2. If cutting blade still stops under load? Disconnect from the mains electricity supply and consult your local approved Service Centre. Fails to stop when one switch lever is released. Immediately disconnect from the mains electricity supply and consult your local approved Service Centre. Poor cut quality 1. Ensure the product is being used correctly (see How to Use) 2. Ensure blades are free from trapped debris 3. Damaged Blades? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre. Excessive Vibration Immediately disconnect from the mains electricity s...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :