Évaluations - 1, GPA: 3 ( )

Fabricant : Remington Power Tools Taille : 1.01 mb Nom Fichier : Langue d'enseignement:

6. After each cutter is sharpened, move chain forward to sharpen next cutter. File all cutters on one side of chain. 7. Move to other side of chain and repeat process. Filing Cutter Depth Gauges The cutter depth gauge clearance is reduced as cutters are sharpened. After every second or third sharpening, reset cutter depth gauges. 1. Place depth gauge tool (.025") firmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 21). 2. Use medium flat file. File depth gauge level with depth gauge tool. 3. Remove depth gauge tool. With flat file, round off front corner of cutter depth gauge (see Figure 22). After several hand filings, have authorized service center or sharpening service machine sharpen chain. This will insure even filing. REPLACING SAW CHAIN Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Replacement Parts and Accessories. STORAGE If storing saw for more than 30 days, follow steps below. 1. Drain oil tank. 2. Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture. 3. Dry guide bar and chain. 4. Place chain in container filled with oil. This will prevent rust. 5. Wipe a thin coating of oil over surface of guide bar. 6. Wipeoffoutsideofsawbody.Dothiswithsoftcloth dampened with a mild soap and water mixture. 7. Store chain saw • in a high or locked place, out of children’s reach • in a dry place • in a carrying case or with scabbard over guide bar TECHNICAL SERVICE You may have further questions about assembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at desatech.com or contact our Technical Service Department at 1-800-858-8501 (English Only). You may also write to: DESA Specialty Products™ P.O. Box 90004 Bowling Green, KY 42102-9004 ATTN: Technical Service Specialty Products When contacting DESA Specialty Products™, have ready • Your Name • Your Address • Your Phone Number • Model Number of Product • Date of Purchase (Include copy of receipt for written requests). REPLACEMENT PARTS AND ACCESSORIES WARNING:Useonlyreplacementparts andaccessoriesdescribedinthismanual. Use of other parts or accessories could damage saw or injure operator. For original replacement parts and accessories, contact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 47. Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated. See pages 48 and 49 for an Illustrated Parts List. If you need additional referral information, contact our Technical Service Department (see Technical Service). In Canada call 1-800-561-3372 for parts information. You may purchase the following service or replace ment parts: LNT-2 Part Number Description 104302-01S# Guide bar, 8" (20.3 cm) 104301S# Chain, 8" (20.3 cm) 097567-01S Guide bar, 10" (25.4 cm) 091371S Chain, 10" (25.4 cm) 097568-02S Guide bar, 12" (30.5 cm) 091373-02S Chain, 12" (30.5 cm) 075752 Drive Sprocket # Must order both pieces Continued 108539 21 REPLACEMENT PARTS AND ACCESSORIES Continued POLE SAW, 104316-04, 104316-05, 108526-01 (8"/20.3 cm) POLE SAW ASSEMBLY, 104317 Part Number Description 104302-01S Guide bar, 8" (20.3 cm) 104301S Chain, 8" (20.3 cm) 075752 Drive Sprocket POLE SAW, 106890-01, 106890-02, 108526-01 (10"/25.4 cm) POLE SAW ASSEMBLY, 106821, 106821A Part Number Description 097567-01S Guide bar, 10" (25.4 cm) 091371-03S Chain, 10" (25.4 cm) 075752 Drive Sprocket GENERAL Part Number Description 079963-02 Plastic scabbard, 8"(20.3 cm) & 10" (25.4 cm) 106809-01 Hand Guard 077155 Adjusting Plate Assy. REPAIR SERVICE Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty. Each Authorized Service Center is independently owned and operated. WARRANTY SERVICE If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty. NON-WARRANTY SERVICE If product requires service, return it to nearest Authorized Service Center. Repairs will be billed to you at regular repair list prices. For additional Service Center or warranty information, call 1-800-858-8501 or visit our Technical Service web site at 108539 22 TROUBLESHOOTING WARNING: Unplug chain saw from Note: For additional help, visit DESA Specialty powersourcebeforeservicing.Severeinjury Products’™ technical service...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :