Log:
Évaluations - 2, GPA: 4.5 ( )

Instructions Remington Power Tools, Modèle RPS2N1, 104317, PS1510A

Fabricant : Remington Power Tools
Taille : 3.04 mb
Nom Fichier :
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


Improper use of this chain saw can cause severe injuryordeathfromfire,electricalshock, body contact with moving chain, or falling wood. BEForE opEratING Saw 1. Read and understand this owner’s manual before operating saw. 2. Watch what you are doing. Use common sense. Do not operate saw when you are tired. 3. Use saw for cutting wood only. • Do not use chain saw for purpose not intended. • Do not use for cutting non-wood items. 4. Only well-instructed adults should operate saw. Never allow children to operate saw. 5. Use only electrical voltage noted on model plate of saw. 6. Use only extension cords marked for outdoor use. See page 21 for extension cord requirements. 7. Do not operate saw • while under the influence of alcohol, medication, or drugs • in rain or in damp or wet areas • where highly flammable liquids or gases are present • if pole or saw is damaged, adjusted wrong, or not fully and securely assembled • if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized service center (see Technical Service, page 21). • while in a hurry • while in tree or on a ladder • while on aerial booms, buckets, or platforms 8. Wear snug-fitting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain. 9. Wear the following safety gear when operating saw: • heavy-duty gloves (wear rubber gloves when working outdoors) • steel-toed safety footwear with non-skid soles • eye protection such as safety glasses, goggles, or face screen • safety hard hat • ear mufflers or ear plugs • hair covering to contain long hair • face or dust mask (if working in dusty areas) 10. Before cutting, always provide the following: • clear work area • secure footing • planned retreat path from falling limbs 11. Inspect tree before trimming or cutting down. Make sure there are no dead limbs or branches that may fall on you. Make allowance for branches to fall freely to the ground. 12. Do not use pole saw to fell saplings. Use the chain saw without pole attachment. 13. To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way. wHILE opEratING Saw 1. Stay alert. Use common sense while operating saw. 2. Keep work area clean. Cluttered areas invite injuries. 3. Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times. 4. Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area. 5. Do not use the pole saw to cut down trees. Use the chain saw without pole attachment and only if you are trained or have expert help. 6. Do not use near power lines. Keep at least 10 feet away from electrical lines. 7. If two or more persons perform bucking and felling operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled. 8. Secure wood you are cutting by using clamps or chocks. IMportaNt SaFEtY INForMatIoN 9. Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle. 10. Grip pole saw securely. Place one hand on the pole and the other on the handle. 11. Keep finger off trigger until ready to make cut. 12. Before starting chain saw, make sure chain is not touching anything. 13. To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts. 14. Keep all parts of body away from chain when saw is running. 15. Do not force saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended. 16. Do not cut small brush and saplings with the pole saw. Use the chain saw only, with extreme care. Slender matter may catch in the chain and be whipped toward you. This could also pull you off balance. 17. When cutting limb or tree trunk that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back and strike operator causing severe injury or death. 18. Carry saw from one place to another • with saw stopped and unplugged • Chain saw - by holding front handle (never use hand guard as handle) • Pole saw - with telescoping pole returned to shortest position • Pole saw -by holding the pole at the balance point (close to saw end) • with finger off trigger • with guide bar and chain to rear warNING: this product contains chemicals known to the State of california to cause cancer or birth defects, or other reproductive harm. warNING: Some dust created by power sanding, sawing, grinding, drilling, and other ...

Ce manuel est également adapté pour les modèles :
Benzo et scies - 104317, PS1510A (3.04 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories