Évaluations - 5, GPA: 4.6 ( )

Fabricant : Electrolux Taille : 3.79 mb Nom Fichier : Langue d'enseignement:

12. Transport and storage precautions. Each time the work area is changed to another location, disconnect the machine from the main line and activate the chain brake lever. Mount the guide bar cover guard each time before transporting or storage. Always carry the machine by hand with the bar facing backwards, or when transporting the machine in a vehicle, always attach it securely to prevent damage. Never carry the machine by the cable. After use, store the machine in a dry, high place, far from heat sources and out of reach of children. 13. Precautions against fire risk. Never use the machine in areas where there are naked flames, inflammable or potentially explosive materials. 14. Kickback reaction. The kickback reaction consists of a violent upwards-reverse action of the bar towards the user. This generally occurs if the upper part of the bar nose (called the “kickback danger zone”) comes into contact with some object, or if the chain is blocked in the wood. The kickback reaction is a very quick sudden motion along the bar cutting plane (generally in an upward direction, but this also depends on the machine position during cutting action). Kickback can make the user loose control of the machine provoking dangerous and even mortal accidents (i.e: if the saw with the chain in rotation is thrust back against the user). The chain brake lever and other safety devices are not sufficient to protect the user against injury: the user must be well aware of the conditions that can provoke the reaction, and prevent them by paying very close attention according to experience, together with prudent and correct machine handling (for example: never cut several branches at a time because this can cause accidental impact on the “kickback danger zone”; never mount incorrect bars or chains; make sure the chain is always sharp and sharpen according to correct methods, because incorrect sharpening can cause kickback; when choosing the bar, remember that the smaller the nose radius, the smaller the kickback danger zone). C. SAFETY EQUIPMENT DESCRIPTION 1,3,6,8,12 SWITCH BLOCK Your machine is equipped with a device (fig.1) that when deactivated, stops the switch from being pressed thus preventing accidental start-up. CHAIN BRAKE ACTION ON SWITCH RELEASE (for ES18 models only) Your machine is equipped with a device that blocks the chain immediately as soon as the switch is released; If this device should not work at any time, the machine must NOT be used, and must be taken to an Authorised Service Centre. FRONT HAND GUARD / CHAIN BRAKE LEVER The front hand guard (fig.2) is designed to prevent your left hand from coming into contact with the chain (on condition that the machine is held correctly according to instructions) . The front hand guard also acts as a chain brake, including a device that blocks the chain in a few fractions of a second in the case of kickback. The chain brake is released when the front hand guard is pulled backwards and blocked in position (the chain is able to move). The chain brake is activated when the front hand guard is pushed forward (the chain is blocked). ENGLISH – 5 The chain brake can be activated in two modes: the first using the left wrist by pushing forwards, or when it comes into contact with the brake system as a result of kickback; or by inertia, in t...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :