Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
• Square-ground chisel cutters, factory • Superior cutting speed and the ultimate in overall ground with optimum angles peformance (nose-clear, nose-buried, and boring) • Smooth, easy cutting, minimal feed force required, minimizes operator fatigue • Depth gauge is ramp-shaped, • Reduces roughness and kickback energies and offset without affecting performance • Clean-ground gullet • Maximum chip flow, helps prevent clogs from debris • No out-of-the-box filing is needed • Lubrilink™ tie straps • Improved chain and bar lubrication • More oil stays where it’s needed – on the chain Safety / ANSI: 58CJ/CL and 59CJ/CK/CL are yellow-label chains with kickback-reducing features. These chains do not meet the kickback requirements for low-kickback chains. Recommended Use: Professional use by loggers and forest firefighters who prefer large saws and square-ground .404”-pitch chain. FEATURES • The volume of oil required is reduced • Long, high-strength cutter top plate • Long working life, durable, resists breakage • Made from patented OCS-01 steel-alloy • Tougher than the steel on other chains, 20% tougher material (U.S. patent no. 5,772,957) at room temperature, 125% tougher at minus 20° F Because every cut counts 59CL F&B A107036 AA 0301 CHAIN PART CUTTER CUTTER KICKBACK-REDUCING NUMBER PITCH GAUGE SEQUENCE TYPE FEATURES 58CJ .404” .058” Skip Square-ground Ramp-shaped 58CL .058” Standard Chisel Depth Gauges 59CJ .063” Skip 59CK .063” Semi-skip 59CL .063” Standard WHO SHOULD USE SQUARE-GROUND CUTTING CHAINS? Square-ground chains are intended for professional more difficult to sharpen and less forgiving of filing users who cut larger wood with guide bars 30” and errors than the round-ground chains used by most longer. The advantage of square-ground chain is its woodcutters. But for professional users cutting larger fast-cutting performance. The disadvantage is that it is wood, square-ground chains are often preferred. FILING INSTRUCTIONS FOR 58CJ/CL AND 59CJ/CK/CL CHAINS IMPORTANT NOTE: Several shapes of files can be used to sharpen square-ground chain. But whichever shape you prefer, the key to sharpening square- ground chain is file positioning. The file will sharpen the top plate and side plate simultaneously. This creates a line (A). You must position your file so this line intersects the cutter’s “Working Corner” (B), or your square-ground chain will not perform properly. CORRECT FILE POSITION FILE IS TOO HIGH FILE IS TOO LOW Line A intersects corner B .025" 40-50° 85° 15° DEPTH-GAUGE SETTING: TOP-PLATE CUTTING ANGLE: SIDE-PLATE ANGLE: TOP-PLATE FILING ANGLE: *See warning below FILE TYPE DEPTH GAUGE TOOL, .025” FLAT FILE Sharpening square-ground chain requires a specialtype of file, available from your local saw-chain deized aler 31941 (10-PK.) 12211 (12-PK.) Failure to follow filing instructions can increase the level of kickback which can result in severe injury to the saw operator or bystanders. * Do not exceed the depth-gauge setting shown above * ...
Ce manuel est également adapté pour les modèles :Benzo et scies - 58-Series (56.4 kb)