Log:
Évaluations - 5, GPA: 3.8 ( )

Instructions Desa, Modèle LNT-3 12-inch

Fabricant : Desa
Taille : 954.91 kb
Nom Fichier :
Langue d'enseignement: enfr
Aller à la télécharger



Facilité d'utilisation


• Use extreme caution when re-entering a previous cut. • Do not twist saw when removing guide bar from undercut. • Use wedges made of plastic, wood, or light alloy (never steel or iron) to hold cut open. CHAIN SAW OPERATION 1. Stay alert. Use common sense while operating chain saw. 2. Keep work area clean. Cluttered areas invite injuries. 3. Be aware of extension cord while operating chain saw. Be careful not to trip over cord. 4. Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area. 5. Do not cut down a tree unless you are trained or have expert help. 6. If two or more persons perform bucking and felling operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled. 7. Secure wood you are cutting by using clamps or chocks. 8. Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle. 9. Keep finger off trigger until ready to make cut. 10. Before starting chain saw, make sure chain is not touching anything. 11. Avoid body contact with grounded objects such as pipes, wire fences, and metal posts. 12. Keep all parts of body away from chain when saw is running. 13. Do not force chain saw while cutting. Apply light pressure. 14. Cut small brush and saplings with extreme care. Slender material may catch in chain and be whipped toward you. This could also pull you off balance. 15. When cutting limb or tree trunk that is under tension, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back and strike operator causing severe injury or death. 16. Do not activate the chain brake to stop saw. Always release trigger to stop saw. 17. Carry chain saw from one place to another • with chain saw unplugged • by holding front handle (never use front hand guard as handle) • with finger off trigger • with guide bar and chain to rear • with scabbard in place 4 100583 OWNER’S MANUAL SAFETY WARNINGS Continued MAINTENANCE AND STORAGE OF CHAIN SAW 1. Unplug chain saw from power source • when not in use • before moving from one place to another • before servicing • before changing accessories or attachments 2. Inspect chain saw before and after each use. Check saw closely if guard or other part has been damaged. Check for any damage that may affect operator safety or operation of saw. Check for alignment or binding of moving parts. Check that switch turns motor on and off. Check for broken or damaged parts. Do not use chain saw if damage affects safety or operation. Have damage repaired by authorized service person. 3. Maintain chain saw with care. • Never expose saw to rain. • Keep chain sharp, clean, and lubricated. • Follow steps outlined in this manual to sharpen chain. • Keep handles dry, clean, and free of oil. • Keep all screws and nuts tight. • Inspect power cord often. If damaged, have repaired by authorized service person. • Never carry chain saw by power cord. • Never yank power cord to unplug it. • Keep power cord from heat, oil, and sharp edges. • Inspect extension cords often and replace if damaged. 4. When servicing, use only identical replacement parts. 5. Always store chain saw • in a high or locked place, out of children’s reach • in a dry place • in a carrying case or with scabbard over guide bar CHAIN SAW NAMES AND TERMS Bucking Process of cutting a felled tree or log into lengths. Felling Process of cutting down a tree. Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut. Front Hand Guard Shield between front handle and guide bar. Protects left hand while using saw. Front Handle Located at front of saw body. Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain. Guide Bar Nose Tip or end of guide bar. Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is movin...

Ce manuel est également adapté pour les modèles :
Benzo et scies - EL-7 14-inch (954.91 kb)
Benzo et scies - EL-7 14-inch (954.91 kb)
Benzo et scies - EL-7 16-inch (954.91 kb)
Benzo et scies - LNT-2 10-inch (954.91 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories