Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
Be sure that the saw’s chain stops moving when the throttle control trigger is released. • Use extreme caution when cutting small-sized brush and saplings because slender material may catch the chain saw and whip towards you or pull you off balance. •When cutting a limb that is under tension, be alert for springback so that you will not be struck when the tension in the wood fibers is released • Do not cut through nails, rods in the tree, railroad ties or pallates. Inspect a tree that you are going to cut for foreign objects that could cause injury or damage to your chain saw. • After striking a foreign object, stop the motor and thoroughly inspect for damage. Repair as necessary. •We do not recommend using the chain saw in a tree or on a ladder. • All chain saw service, other that the items listed in this instruction manual maintenance instructions, should be performed by competent chain saw service personnel. • Use the right tool. Only use this chain saw for its intended purpose, to cut wood. • Do not overreach. Always keep proper footing and balance. • Always hold the unit with both hands when operating. Keep a firm grip on all handles or grips. • Apply chain brake prior to any repositioning of the operator in the cutting area. As an additional safety precaution, apply the chain brake prior to setting down the saw. • Never touch the chain or attempt to service the saw while the motor is running. Make sure all moving parts have stopped. Allow the chain saw to cool, as the chain can be hot. • Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the chain saw. or tip of the guide bar touches an object, orwhen the wood closes in and pinches thesaw chain in the cut. Tip contact in somecases may cause a lightning-fast reversereaction, kicking the guide bar up and backtowards the operator. Pinching the saw chainalong the top of the guide bar may push theguide bar rapidly back toward the operator. Either of these reactions may cause you tolose control of the saw, which could result in serious personal injury. Do not rely exclusively upon the safetydevices built into your saw. As a chain saw user, you should take several steps to keepyour cutting jobs free from accident or injury. KICKBACK SAFETY PRECAUTIONS •With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. Be alert to the potential for kickback at all times. • Keep a good firm grip on the saw with both hands, the right hand on the rear handle and the left hand on the front handle, when the motor is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go. •Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction that could be hit while you are operating the saw. • Always cut with the motor running at full speed. Fully squeeze the throttle trigger and maintain a steady cutting speed. • Use only the correct original equipment manufacturer replacement bars, chains and other parts and accessories. These are available from your authorized service dealer. Use of any unauthorized parts or accessories could lead to serious injury to the user, or damage to the unit, and will void your warranty. • Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. •Use only the replacement guide bars and low kickback chains specified for your saw to avoid injury. RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION OTHER SAFETY PRECAUTIONS • Do not operate a chain saw with one hand! Serious injury to the operator, helpers, bystanders, or any combination of these persons may result from one- handed operation. A chain saw is intended for two- handed use. • Do not operate a chain saw if you are fatigued. • Use safety footwear; snug-fitted clothing; protective gloves; and eye, hearing, and head protection devices. • Do not allow other persons to be near the chain saw when starting or cutting with the chain saw. Keep bystanders and animals out of the work area. • Do not remove, damage or de-activate any of the safety devices. Never use a damaged, modified, or improperly repaired or assembled chain saw. Check their proper operation regularly. Only use bars and chains of the length indicated in the table herein. • Never carry out operations or repairs on your own that are other than routine maintenance. For information, contact specialized and authorized workshops only. • If your chain saw is no longer usable, dispose of it properly without damaging the environment by handing it in to your local dealer who will arrange for its correct disposal. • Use caution when felling a tree. Make sure you have plann...
Ce manuel est également adapté pour les modèles :Benzo et scies - TB3516 (1.77 mb)
Benzo et scies - TB3516 (1.77 mb)
Benzo et scies - TB3516 (1.77 mb)
Benzo et scies - TB3516 (1.77 mb)