Évaluations - 2, GPA: 4.5
(
)
)
|
Facilité d'utilisation
• Do not remove any accessories until the appliance has stopped completely. • Do not use the blade and the grating/slicing disc at the same time in the jug. Positioning the appliance • Always place the appliance at the back of the kitchen counter. • Do not place next to hot areas, for example gas rings and electric hotplates. Cord, plug and mains socket • Ensure that the cord is fully extended. • Do not allow the cord to hang over the edge of a table/ counter, and keep it away from hot objects and naked flames. • Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way. • If the appliance or plug is damaged, it must be inspected and if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself. • Unplug before changing accessories, taking the lid off the jug or cleaning, and when not in use. • Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug. • Check that it is not possible to pull or trip over the cord or any extension cord. KEY TO MAIN COMPONENTS OF THE APPARATUS 1. Power cord 2. Motor section 3. On/off button 4. Blade bushing for shaft (not visible in picture) 5. Jug 6. Motor spindle 7. Jug lid 8. Funnel 9. Tamper 10. Blade 11. Plastic cover for blade 12. Stirrer 13. Shredder 14. Blade 15. Citrus presser adapter 16. Citrus press PRIOR TO FIRST USE Before using for the first time, or after prolonged storage without use, wash any parts that will come into contact with food. USING THE APPLIANCE • Place the motor section (2) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suckers underneath. • Fit the short end of the blade bushing (4) into the shaft hole on the motor section. • Fit the jug (5) onto the blade bushing with the handle pointing towards you. Lock the three studs on the motor section into the three holes on the base of the jug. • Fit the motor spindle (6) on the stud in the middle of the jug. • Fit the required accessories, and place the ingredients into the appliance as described below. • Start by turning the on/off button (3) to position “1” or “2” and switch it off by turning it back to position “0”. • To use for brief food preparation, turn the on/off button to position P (pulse function). The appliance will run at top speed as long as you hold the button down in that position, and will stop when you release the button, which then automatically reverts to position “0”. • When using the knife (10) or blade (12), stop the food processor at regular intervals and check whether the food has been adequately blended/chopped. 1010 IMPORTANT! If using to chop different types of food (e.g. raw meat followed by vegetables, or egg followed by fruit), you must wash the parts that come into contact with food between each type of food. Using knife or stirrer • Remove plastic cover (11) from knife. Fit knife or stirrer to motor spindle. • Place the food in the jug. • Fit lid (7) to jug and turn clockwise until the long plastic tab locks into place on the motor section, and the three holders along the lid edge engage the studs on the jug. • Start appliance. Using the shredder • Fit the shredder (13) onto the motor spindle. Turn the blade (14), so that the cutters are upwards. Press the shredder under the studs on the drive. Turn clockwise until it locks. • Fit lid to jug and turn clockwise until the long plastic tab locks into place on the motor section, and the three holders along the lid edge engage the studs on the jug. • Start appliance. • Place food in jug through the funnel (8) a little at a time and push down using the tamper (9). TIP • If adding more food later, always use the funnel. Stop the appliance before removing the stopper, to avoid splashes. • Always switch off before removing lid from jug. • If you need to scrape inside the jug, wait until the blade has stopped completely before you remove the lid! Always switch electricity supply to appliance off, or remove jug completely, before scraping it. Use the spatula, never your fingers. • Turn lid anticlockwise to remove. Important! Do not use to crush ice and frozen berries. Damage to the knife and motor can result. Using the citrus press • Fit citrus press adapter (15) to accessories shaft and turn clockwise until the long plastic tab locks into place on the motor section, and the three holders along the lid edge engage the studs on the jug. • Press citrus press (16) into place on the adapter. • Start appliance. Storage Ensure the appliance is clean and dry before storing. CLEANING • Before cleaning, remove the plug from the wall socket. • The best way to clean the motor section is with a slightly dampened cloth and, if necessary, a little detergent. Do NOT immerse the motor section in any form of liquid! • The jug and all loose parts can be washed in soapy water. • Do not use any kind of strong or...