Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
• Before removing the mixer jug, switch the appliance off, remove the power plug and wait for the motor to stop revolving. Filling and mounting the mixer jug Only fill the mixer jug when it is removed from the motor unit. Afterwards, firmly press the lid onto the mixer jug. Ensure that the pourer on the mixer jug is also securely closed. Insert the filling cap into the lid opening and secure it by turning it clockwise. Place the ready filled and sealed mixer jug onto the motor block. Lightly turn the mixer jug until you can press it down. The motor can start only when the mixer jug is securely positioned. When the mixer jug is filled, completely sealed and securely fitted to the motor block, you can then switch the appliance on. Place the switch on ... – Level 1-3 for fluid or soft foodstuffs, for mixing, blending and stirring – Level 3-5 for firmer foodstuffs or for hacking – Level Ice Crush/Clean for a short, powerful impulse operation, e.g. for crushing ice cubes or for cleaning. To avoid overburdening the motor the switch does not lock into this position. Therefore, hold the switch in this position for a short period. Filling when in use Warning! Should you wish to insert further foodstuffs during operation, you may ONLY open the filling cap provided for this purpose. • Under no circumstance should you open the lid. Pieces of the foodstuff could be thrown out at high speeds! • Do not insert cutlery items or mixing tools into the mixing jug when the appliance is in use. There is a considerable risk of injury should these make contact with the swiftly rotating cutters! To insert something when the appliance is in operation, ... turn the filling cap anti-clockwise and remove it. Afterwards, replace the filling cap into the lid and secure it by turning it clockwise. - 4 Removing the mixer When the processing of the foodstuffs is complete: Always first place the switch into the OFF position ("0") and remove the power plug. Wait until the motor has come to a complete standstill before lifting the mixer jug straight up. It does not need to be turned. Useful tips – The best results when blending firm ingredients are achieved by placing small portions one after the other into the mixer jug instead of inserting a single large portion. – When processing firm ingredients, cut them into small pieces (2-3 cm). – When mixing liquid ingredients begin first of all with a small measure of fluids. Gradually add more fluids to the mixture through the filling cap. – The appliance can be stabilised by placing your hand on top of the closed liquidiser during operation. – For the stirring of firm or very viscous foodstuffs it can be beneficial to use the impulse-operation, which helps avoid a blocking of the cutters. Cleaning Caution! Before starting to clean the liquidiser and its components: • Ensure that the motor is switched off and the power plug removed from the socket. • Under no circumstance may the motor block be submersed in water or other fluids.This could result in you receiving a fatal electric shock and the appliance could be damaged. • Never open the housing of the appliance. This brings with it the risk of receiving a fatal electric shock. • Never disassemble the cutters and never reach into the mixer jug. The cutters are extremely sharp! • Do not use solvents or abrasive cleaners on the plastic surfaces, they could be damaged by them. Cleaning the mixer So that you do not injure yourself on the cutters, clean the mixer jug only with a long handled dishwasher brush. In a case of stubborn soiling, the mixer jug can also be cleaned in a dishwasher. Clean the lid and the filling cap in a dishwasher or with the normal washing up. If you clean the liquidiser directly after use, you can often achieve a satisfactory and hygienic level of cleaning with the following alternative: Fill the mixer jug with water, close the lid and place the mixer jug on the motor block. Insert the power plug into the wall socket and activate the Ice Crush/Clean switch, causing the cutters to rotate in the water with maximum revolutions. - 5 Should this not dislodge the soiling, you can separate the lower plastic part of the mixer jug (with the cutters) Cleaning the motor block from the the glass part: Use a dry cloth or, at the most, a lightly moistened one for cleaning the plastic surfaces. Remove the mixer jug from the motor block. Turn the plastic part of the mixer jug so that it separates itself from the glass part . Attention! Take care with the cutters . They are very sharp. Risk of injury! Clean both parts thoroughly in a mild soapy solution or in a dishwasher. Replace the plastic part of the mixer jug back onto the glass part . Ensure that the sealing ring is correctly fitted. At every cleaning check that the contact switch in the receptor for the mixer jug is not blocked by soiling residues. If you cannot dislodge any blockages with the corner of a piece of paper, make contact with Customer Services. Under no circumstance...