|
Facilité d'utilisation
• Blades are sharp. Handle carefully. • to reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached. • Always operate blender with cover in place. • When blending hot liquids, remove center piece of two-piece cover. • Do not place on or near hot gas or electric burner or in a heated oven • to disconnect, turn the control to off then remove plug from wall outlet • Do not use appliance for other than intended use. sAve tHese instruCtions! sPeCiaL noTes on Cord PLuG this appliance has a polarized plug (one blade is wider than the other). to reduce the risk of electric shock, the plug can fit into a polarized socket only one way. if the plug does not fit fully in the outlet, reverse the plug. if it still does not fit, contact a qualified electrician. Do not modify the plug in any way. PArts Measuring cup Top cover LTR 1.5 1.4 1.3 1.2 1.1 Handle 1.0 Jar 0.9 0.8 0.7 0.6 0.5 Jar Base 0 P1 2 3 4 5 Speed selector Motor unit BeFore THe FirsT use Check that the accessories are complete and the unit is not damaged. Pour a small amount of water into the jar and mix according to the operating instructions below, one or two times, and then empty. Clean top cover, measuring cup, and jar thoroughly with mild soap and warm water. warning: the blade is sharp, handle with care and ensure to unplug the appliance from the outlet before assembling and removing parts. oPerAtinG instruCtions 1. Place the jar on the base, be sure the triangle on the motor aligns with “ mark (see Fig. 1). ” turn the jar clockwise until the triangle is aligned with the “ ” mark (see Fig.2). the appliance cannot be activated without the jar in correct position. 2. Add ingredients to be blended. the volume of ingredients should not exceed the max level as indicated on the jar. note: never use boiling liquids or run the appliance empty. 3. replace the top cover on the jar. 4. You may add ingredients into the jar through the opening in the top cover during operation, then replace measuring cup. Align the tabs of the measuring cup with the grooves of the top cover. Press down and turn the measuring cup counter-clockwise until the measuring cup is in place. 5. Connect the plug to the wall outlet and set speed selector to desired setting. see figure 3 for detailed information of the speed selector. note: make sure the top cover is placed in position completely before operating, and never open the top cover during operation. Stop At any time, set the knob to “0” to stop the appliance Pulse Fig. 1 Fig. 2 Set and hold the pulse, release the knob to stop P 0 1 2 Lowset speed 3 4 5 Highest speed Fig. 3 6. the maximum run time is 1 minute. the minimum rest time is 2 minutes. the appliance must rest for 30 minutes every 10 cycles. 7. turn the speed selector to the “0” position once the ingredients have been blended to the desired consistency. 8. turn the jar counter-clockwise and remove from base. Carefully remove the top cover, then pour and serve. CLeAninG the auto clean feature can clean the blender and blade assembly fast and easy. • Pour a small amount of warm soapy water into the jar and turn the speed selector to the P position for a few seconds. • remove the jar and rinse under running water. • Wipe the outer surface of the motor with a damp cloth. • Do not use abrasive cleansers. • never immerse in water for cleaning. • Dry all parts and then replace. the blade can be disassembled for complete cleaning. twist the base of the jar off the bottom (see Fig. 4). Carefully remove the blade. the top cover, measuring cup, jar, jar base, and blade assembly are dishwasher safe components. Be sure your dishwasher does not exceed 158 degrees fahrenheit. Fig. 4 teCHniCAL inFormAtion model no. rated voltage rated power Capacity Dimensions Weight 169099 120v 450W 1.5L 220x200x430mm 3.7Kg Customer AssistAnCe For faster service, please have the model number and product name ready for the operator to assist you. this number can be found on the bottom of your appliance and on the front page of this manual. model number: ____________________ Product name: _________________________ Customer Assistance number 1-877-207-0923 (...
Ce manuel est également adapté pour les modèles :Blenders - 169099 (193.08 kb)