|
Facilité d'utilisation
Figure 1. Model T10050. Inventory (Figure 2) A. Bender (not shown)....................................1 B. Bender Handle ........................................... 1 C. Work Stop Rod...........................................1 D. Hex Bolts M10-1.5 x 40 (Handle)............... 2 E. Flat Washers 10mm (Handle) .................... 2 F. Work Stop................................................... 1 G. Work Stop Knob ......................................... 1 H. Hex Nut M12-1.75 (Work Stop Rod)..........1 Specifications Maximum Workpiece Thickness........ 3 Ga.(15.64") Maximum Workpiece Width..............................4" Machine Weight.........................................81 lbs. Figure 2. inventory. If you need help with your new machine, call our Tech Support at: (570) 546-9663. B C d e FG H Copy RiGHT © July, 2008 By G Rizzly iNdu STRial, iNC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #JB10791 pRiNTed i N CHiNa Identification Work Stop Rod Work Stop Clamp die Handle Bending plate Bending plate Knob Clamp Cam Shaft angle Stop Figure 3.. identification. Illustration Legend (Figure 4) Throughout these instructions, diagrams are used to illustrate how the components of the machine are used during the various steps of operation. Familiarize yourself with the following illustration, its relationship to the machine, and the symbols used in it before proceeding through these instructions. -2 .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... Figure 4.. Illustration Legend. T10050 Right angle iron Bender 3.. Thread the work stop knob into the work stop, Assembly then slide the work stop onto the work stop rod (Figure 7). The Model T10050 requires only minimal assembly before use. To assemble the machine: 1.. Connect the bender handle to the machine with the M10-1.5 x 40 hex bolts and 10mm flat washers (Figure 5). Figure 5.. Attaching handle. x2 Handle Hex Bolt Flat Washer Figure 7.. Work stop. Work Stop Work Stop Rod Knob 2.. insert the stop rod with the M12-1.75 hex nut into the base. Tighten the hex nut against the base to secure it (Figure 6). Work Stop Rod Hex Nut Figure 6.. Attaching work stop rod. -3 T10050 Right angle iron Bender Mounting Operations once you have confirmed that your machine is assembled and functioning properly, mount it to a workbench through the holes in the base. Be sure the workbench...
Ce manuel est également adapté pour les modèles :Blenders - T10050 (1.69 mb)
Blenders - T10050 (1.69 mb)
Blenders - T10050 (1.69 mb)