Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
Therefore, this unit may not A“ ” means that the desired operation is not respond to all operating commands. THIS IS permitted by the unit or disc. NOT A DEFECT. Please refer to the instructions accompanying the specific disc in question for Playing a Blu-ray Disc or DVD 1. Slide the CHARGE/OFF/ON switch to the ON position. See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2. 2. Push to open the disc door. 3. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”. 4. Push the disc door gently to close it. It takes a short while for your unit to load the disc. After loading, for most discs, the unit will automatically take you to the main menu or start playing. If the unit does not automatically start playing the disc, press the PLAY button. Pausing Playback (Still Mode) Press the (PAUSE) STEP button to pause. To resume normal playback, press the PLAY button. Each time you press the (PAUSE) STEP button, the picture advances one frame on disc . Stopping Playback To stop playback, press the STOP button. To resume playback, press the PLAY button. Depending on the disc, playback starts where it stopped or at the beginning of the disc. If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset the disc to the beginning. Skipping to a Different Track • Press the SKIP button to go back to previous titles/chapters/tracks. • Press the SKIP button to advance titles/chapters/tracks. • For an audio CD, use the number buttons on the remote control to go directly to the desired track number. Zooming into an image While a disc is playing, press the ZOOM button to enlarge the image in serveral levels. • While an image is zoomed, you can use the , , or CURSOR button to shift the view and display the part you want. • To return to normal view, press the ZOOM button repeatedly until "OFF" shows. The screen will return to normal. • When you reach the edge of the image, the display will not shift anymore in the direction. Fast Forward / Fast Reverse 1. Press the or button when a disc is playing. • The disc begins a fast scan at two times normal (x2) speed. • Each time the or button is pressed, the speed of the fast scan changes. 2. Press the PLAY button when you have reached the desired point to resume playback at normal speed. Audio Selection On some discs, the sound is recorded in two or more formats. Follow the directions below to select the type of playback. 1. While a disc is playing, press the AUDIO button to show the current audio format number. 2. Press the AUDIO button repeatedly to select the desired audio format. Note: • If only one audio format is recorded, the number does not change. • About two seconds later, playback continues in the new audio format. Subtitle Selection 1. While a disc is playing, press the SUBTITLE button to display the current language setting. 2. Press the SUBTITLE button repeatedly to select the desired subtitle language. Note: • Some discs are set to display subtitles automatically, and you cannot turn them off even if you set the subtitle function to off. • During some scenes, the subtitles may not appear immediately after you select your desired scene. • The number of subtitle languages recorded differs depending on the disc. If only one language is recorded, the language does not change. • This function can only be used for discs on which subtitles have been recorded in multiple languages. • Some discs allow you to change subtitles using the disc menu only. If this is the case, press the MENU button and choose the appropriate subtitle on the disc menu. Angle Selection Some discs contain scenes that have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a disc with different angles recorded, press the ANGLE button to view the number of current angles available. 2. Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. • About two seconds later, playback continues from the new angle selected. • If no button is pressed within 10 seconds, playback continues without changing the current angle. Note: • This function can only be used for discs on which scenes shot from multiple angles have been recorded. • If only one angle is recorded, “ ” is displayed. Using the PiP (Picture-in-picture) mode Some Blu-ray Discs support picture-in-picture (PiP) mode. In PiP mode, the primary video is Primary video displayed on the full screen, and the secondary video is displayed in a small window. • Press PiP button to turn PiP mode on or off. • Press AUDIO or SUBTITLE button to turn Secondary video the audio/subtitle for the video in the PiP window on or off. Then use cursor buttons and OK button to select your preferred options. Note: • The available options of Audio vary from different disc format. • PiP Subititle is not available for a...