Évaluations - 3, GPA: 5
(
)
)
|
Facilité d'utilisation
If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible. 24p Output When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p. .When playing DVD-Video, set to “On” and then also set “24p” in “Video” (• 28) to “On”. .When BD-Video images other than 24p are played, images are output at 60p. HDMI Color Mode This setting is for selecting color-space conversion of the image signal when the unit is connected using an HDMI cable. HDMI Audio Output This setting selects whether or not to output audio from HDMI.Audio will be output through the system's speakers when "Off" is selected. VQT2T10 30 VIERA Link Set to use “HDAVI Control” function when connected with an HDMI cable to a device that supports “HDAVI Control”. .Select “Off” when you do not want to use “HDAVI Control”. Deep Color Output This setting is for selecting whether to use Deep Color output when a television that supports Deep Color is connected. Contents Type Flag Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected. Power Off Link Select the desired power off link setting of this unit for VIERA Link operation (• 25). (This works depending on the settings of the connected VIERA Link “HDAVI Control” compatible equipment.) Video/Audio: When the TV is turned off, this unit will turn off automatically. Video: When the TV is turned off, this unit will turn off except during the following conditions: jCD or MP3 audio playback jiPod mode jRadio mode j“AUX”, “ARC” or “D-IN 1” (DIGITAL IN 1) mode (non-selected TV AUDIO setting for VIERA Link) j“D-IN 2” (DIGITAL IN 2) mode (non-selected CABLE/ SAT AUDIO setting for VIERA Link) TV Audio Input Select the TV audio input to work with the VIERA Link operations. Others Remote Control Code Change the remote control code, when other Panasonic products react to this remote control. Quick Start* Speed of startup from power off is increased. .Internal control unit will be powered when it is set to "On”, so contents of the following will be different from the time it is set to “Off”. – Idle power consumption will increase. (about the power consumption • 40) *The cooling fan may turn slowly to prevent overheating of internal parts. * Depending on the power conserving setting activated on the TV, this function may have less effect when the unit is started by the power on link function. (• 25) Easy setup (• 15) You can execute basic settings to optimize your home theater system. Restore Default Settings This returns all values in the Setup menu and the playback menu, except for “Remote Control Code”, “On-screen Language”, “DVD-Video Ratings” and “BD-Video Ratings” to the default settings. System Information Display firmware version of this unit. Speaker settings Delay time For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If either distance A or B is less than C (• below), find the difference in the relevant table and adjust the delay time to make up for the difference. A : B : C LLSRCSWRSCRSLSA BC D A B C: Primary listening distance A Approximate room dimensions B Actual speaker position C Ideal speaker position D Circle of constant primary listening distance 1 Press [ 0.0ms3, 4, 2, 1] to select the distance box ( ) and press [OK]. msCompleteTestLSRLRSdBdBdBmsC0dBSW . . A Center (C) B Left Surround (LS), Right Surround (RS) 2 Press [3, 4] to select the setting and press [OK]. A Center speaker Difference Setting Approx. 34 cm (1 ft. 1 in.) 1.0 ms Approx. 68 cm (2 ft. 2 in.) 2.0 ms Approx. 102 cm (3 ft. 4 in.) 3.0 ms Approx. 136 cm (4 ft. 5 in.) 4.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms B Surround speakers Difference Setting Approx. 170 cm (5 ft. 6 in.) 5.0 ms Approx. 340 cm (11 ft. 1 in.) 10.0 ms Approx. 510 cm (16 ft. 8 in.) 15.0 ms Advanced VQT2T10 31 Adjusting speaker level Volume (Channel balance) ( dB 0 ) (Effective when playing multi-channel audio) 1 Select “Test” and press [OK]. A test signal is output. 2 While listening to the test signal Press [3, 4] to adjust the volume of each speaker. The volume can be adjusted between r6 dB to s6 dB. . Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively. . No signal is output for the subwoofer. To adjust its volume, see page 18, “Adjusting speaker level during play”. 3 Press [OK]. The test signal stops. . ms Complete dBdB Test LS RL RSdBms C 0 dBSW. . A Center (C) B Test C Left Surround (LS), Right Surround (RS) Speaker installation option Attaching to a wall You can attach all of the speakers (except subwoofer) to a wall. . The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper a...