Évaluations - 4, GPA: 4
(
)
)
|
Photos et spécifications LG BE06LU10 |
Facilité d'utilisation
NOTE 7 8 Operation Loading and ejecting a disc Remember - AC adapter must be connected. Make sure the power is turned on. Loading a disc 1. Push the Eject Button to open the Disc tray. 2. Load a disc. (Label facing up.) 3. Close the Disc tray. Ejecting a disc 1. Push the Eject Button to open the Disc tray. 2. Removing the disc. 3. Close the Disc tray after removing the disc. Emergency Eject This drive has a feature that allows the CD to be ejected manually in case of a drive failure or a power outage. NOTE: Don’t use this feature except in an emergency. 1) Turn the power OFF. 2) Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the small hole above the eject button. The front door will pop open and the disk tray will come partway out. 3) Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out. * If you cannot get a good grip on the disc tray with your fingers, use a steel binder clip or spring clamp to pull it out. NOTE: Use this feature for an emergency purpose only. Using it excessively will cause malfunction. Operation Loading and ejecting a disc Remember - AC adapter must be connected. Make sure the power is turned on. Loading a disc 1. Push the Eject Button to open the Disc tray. 2. Load a disc. (Label facing up.) 3. Close the Disc tray. Ejecting a disc 1. Push the Eject Button to open the Disc tray. 2. Removing the disc. 3. Close the Disc tray after removing the disc. Emergency Eject This drive has a feature that allows the CD to be ejected manually in case of a drive failure or a power outage. NOTE: Don’t use this feature except in an emergency. 1) Turn the power OFF. 2) Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the small hole above the eject button. The front door will pop open and the disk tray will come partway out. 3) Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out. * If you cannot get a good grip on the disc tray with your fingers, use a steel binder clip or spring clamp to pull it out. NOTE: Use this feature for an emergency purpose only. Using it excessively will cause malfunction. 9 Playing a music CD Listening to sound When connected to a computer, you can play audio CD’s through your computer’s audio system after setting Digital Audio mode. Check your Windows or “Windows Media Player” manual for detail. Playing DVD video and MPEG2 movie video The drive must be connected to a computer, and basic installation already done. Install the ‘PowerDVD’ software to your PC. Inserting the disc will automatically start installation. Follow the wizard. After installation, remove the PowerDVD software and put it away for safekeeping. Inserting a DVD Video disc into the drive and it will play automatically. NOTES • DVD video region code: Each region around the world has a different region number on the DVD video movies being sold in a region. The region code can be changed to other regions up to 5 times by using the software decoder (PowerDVD). If you change the region code 5 times, the drive will lock onto the last (5th change) region code, and cannot change the drive to another region code. This limitation is a requirement as licensees of DVD drive technology. • When connecting with USB1.1 interface, due to it’s slow transfer time, picture and sound may be disrupted when trying to view a DVD movie. Appendix Appendix Troubleshooting If you are experiencing problems with the drive, verify the following items. Since the problem may be caused by a device other than the drive, check other things such as system settings or other software being used, etc. If you cannot resolve the problem after verifying these items, contact your dealer or our customer service department. Problem Possible Cause Possible Solution Cannot play a DVD or CD in the drive or certain types of discs cannot be read in the drive. 1. The disc is not inserted correctly. 2. The disc is dirty. 3. The pick-up lens is dirty. 4. The disc is scratched or warped. 5. The disc uses a region code that cannot be played on the drive. 1. Reinsert the disc correctly. 2. Clean the disc surface. 3. Clean the pick-up lens. 4. Change the disc. 5. Refer to your system manual for help. Disc tray cannot be opened 1. AC Plug is not connected to AC outlet. 1. Connect the AC plug tightly. Drive is not detected by the system. 1. The USB 2.0 converter cable is not properly connected. 1.Make sure USB 2.0 converter cable is connected properly and re-install the device driver. Drive will not play media or certain types of CD or DVD media 1. The disc doesn’t match your system. Is the media disc the correct format for the type of system that you are using. 2. Virus possibility. 1. Check the disc format. (on a PC an ISO 9660 IBM compatible PC format as opposed to Apple/Mac HFS disc or UNIX disc formats will not function) 2. Has the Windows DVD-ROM software ...
Ce manuel est également adapté pour les modèles :lecteurs de CD / DVD - BE06 (481.44 kb)