Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
[Off]: Turns off the function. 24 ■ [Gracenote Settings] [Auto]: Automatically downloads disc information when disc playback stops. Connect to the network for downloading. [Manual]: Downloads the disc information when [Video Search] or [Music Search] is selected. ■ [System Information] Displays the player’s software version information and the MAC address. [Network Settings] ■ [Internet Settings] Connect the player to the network beforehand. For details, see “Connecting to the Network” (page 12). [View Network Status]: Displays the current network status. [Wired Setup]: Select this when you connect to a broadband router using a LAN cable. [Wireless Setup(built-in)] (BDP-S580/BX58 only): Select this when you use the wireless LAN that is built into the player for wireless network connection. [USB Wireless Setup]: Select this when you use a USB Wireless LAN Adapter for wireless network connection. z For further details, visit the following website and check the FAQ contents: ■ [Network Connection Diagnostics] You can run the network diagnostic to check if the network connection has been made properly. ■ [Connection Server Settings] Sets whether or not to display the connected server. ■ [Renderer Options] [Auto Access Permission]: Sets whether or not to allow automatic access from newly detected DLNA renderer-compatible product. [Renderer Name]: Displays the player’s name as it is listed on other DLNA products on the network. ■ [Renderer Access Control] Displays a list of DLNA controller-compatible products and sets whether or not each product is accessible via this player. ■ [Party Auto Start] [On]: Starts a PARTY or joins an existing PARTY at the request of a networked product compatible with the PARTY STREAMING function. [Off]: Turns off the function. ■ [Media Remote Device Registration] Registers your “Media Remote” device. ■ [Registered Media Remote Devices] Displays a list of the registered your “Media Remote” devices. r£ [Easy Setup] Re-runs the [Easy Setup] to make the basic settings. Follow the on-screen instructions. Ü] [Resetting] ■ [Reset to Factory Default Settings] You can reset the player settings to the factory default by selecting the group of settings. All the settings within the group will be reset. ■ [Initialize Personal Information] You can erase your personal information stored in the player. 25 Settings and Adjustments Additional Information Sound Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Picture There is no picture or the picture is not output correctly. Check that all the connecting cables are securely connected (page 10). Switch the input selector on your TV to display the signal from the player. Reset the video output resolution to the lowest resolution by pressing ■ on the player for more than 10 seconds. For HDMI connections, try the following: ©Turn the player off and on again. ©Turn the connected equipment off and on again. ©Disconnect and then reconnect the HDMI cable. , The HDMI OUT jack is connected to a DVI device that does not support copyright protection technology. For HDMI connections, check the [Output Video Format] settings in the [Screen Settings] setup (page 22). When the analog signals are also output, set [BD/DVD-ROM 1080/24p Output] to [Off] in the [Screen Settings] setup (page 22). , For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] setting in the [Screen Settings] setup (page 22). There is no sound or the sound is not output correctly. Check that all the connecting cables are securely connected (page 10). Switch the input selector on your AV amplifier (receiver) so that the audio signals of the player are output from your AV amplifier (receiver). If the audio signal does not come through the DIGITAL OUT (COAXIAL)/HDMI OUT jack, check the audio settings (page 22). For HDMI connections, try the following: ©Turn the player off and on again. ©Turn the connected equipment off and on again. ©Disconnect and then reconnect the HDMI cable. For HDMI connections, if the player is connected to a TV through an AV amplifier (receiver), try connecting the HDMI cable directly to the TV. Refer also to the instruction manual supplied with the AV amplifier (receiver). , The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals). , The device connected to the HDMI OUT jack does not support the audio format of the player. Check the audio settings (page 22). The HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, and DTS-HD Master Audio) is not output by bitstream. , Set [BD Audio MIX Setting] to [Off] in the [Audio Settings] setup (page 22). Check that the connected AV amplifier (receiver) is compatible with each HD Audio format. The display lan...