Évaluations - 3, GPA: 4.3 ( )

Fabricant : LG Taille : 190.7 kb Nom Fichier : Langue d'enseignement:

• Make sure you have a personal computer with an open USB port before connecting the drive to your computer. • Power for all device should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. Connect the USB converter cable to the External Super Multi DVD Rewriter. Connect the other end of the USB converter cable to your computer. Connect the AC adapter plug to the power connector at the rear of the drive. Attach the AC adapter to the AC wall outlet. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software. • Please do not connect the AC adapter and USB 2.0 converter cable by any means other than specified above. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation To AC wall outlet. USB converter cable NOTES Connecting to computer Hardware Installation NOTES • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. • Make sure you have a personal computer with an open USB port before connecting the drive to your computer. • Power for all device should be turn off before attaching the cables. Connect the drive to the computer as shown in figure. Connect the USB converter cable to the External Super Multi DVD Rewriter. Connect the other end of the USB converter cable to your computer. Connect the AC adapter plug to the power connector at the rear of the drive. Attach the AC adapter to the AC wall outlet. When the computer is ready, confirm that the drive is detected. And then, insert the supplied software CD into the External Super Multi DVD Rewriter and install the software. • Please do not connect the AC adapter and USB 2.0 converter cable by any means other than specified above. • The machine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation To AC wall outlet. USB converter cable NOTES Connecting to computer Hardware Installation NOTES 1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter. 3. Emergency Eject Hole 4. Stop/Eject Button 1. USB Connector This connector is used to connect to the USB converter cable. 2. Power Connector This connector is used to connect to the AC Power adapter cord. Location and function of controls Removing the USB converter cable The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 2 NOTE Don’t remove the USB converter cable when the busy indicator on the drive blinks...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :