Log:
Évaluations - 2, GPA: 4 ( )

Instructions Emerson, Modèle HD7098

Fabricant : Emerson
Taille : 223.77 kb
Nom Fichier : 24bf35e0-c58a-0ce4-11e1-c7873bb1a744.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


NOTE: This optional AC adapter, should be rated as follows: Input : 120V / 60Hz AC. Output : 4.5V DC 500mA. The adapter must have a female-type plug with a positive center: Negative (–) Positive (+) • Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to set the output selector to “DC 4.5V”. •If the AC adapter will not be used for an extended period of time, remove it from the wall outlet by pulling on the adapter housing. Do not remove the adapter by pulling on the cord. Do not touch the AC adapter with wet hands. 6 HD7098_ib080802.p65 6 8/8/2002, 11:00 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS NORMAL PLAYBACK Note: Although this personal CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be effected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. 1.) Connect the headphones to the PHONES jack. Set the volume control to a low level before you begin playback. Set the Function switch to CD position. To PHONES Jack 2 1 ON BBS OFF PLAY/PAUSE VOLUME 2.) Slide the CD Door OPEN switch to the right to release the lock and open the CD Door. 3.) Place your disc on the center spindle with the printed label side facing up. Press down gently near the center hole to make sure the disc is properly seated on the spindle. 4.) Close the door completely until it locks shut. 5.) Press the Play/Pause button. Note: IftheHOLDindicator appearsinthedisplay, set the HOLD switch to the ‘Off’(left) position. “––”flashes in the display as the player reads the disc, then playback begins on Track 1. The Anti- Skip indicator comes on and the playing time shows in the display. 6.) Adjust the VOLUME and BBS (Bass Boost) controls as desired. 7 HD7098_ib080802.p65 7 8/8/2002, 11:00 7.) When all tracks havebeen played the player stops and the display shows the total tracks and playing time on the disc.After approximately 1 minute the power shuts off and the display goes blank. To stop playback before the disc ends press the Stop button at any time. Press the Stop button again to shut the power off immediately. 8.) SlidetheCDDoorOPENswitchtotherighttoopenthedoorandremoveyour disc. Close the CDDoor and return your disc to its protective storage case. PAUSE CONTROL STOPOPEN Press the Play/Pause button during playback to pause momentarily. The sound stops, the track and the time display flashes but the disc continues to spin. Press the Play/Pause button again to cancel pause and resume playback. The sound returns and the display stops flashing. SKIP/SEARCH CONTROLS To skip forward or reverse to another track during playback press the or buttons repeatedly until the desired track number appears in the display. Playback will begin on the desired track. To search forward or backward within a track to locate a specific musical passage press and hold either the or buttons. The player moves forward or reverse at high speed. When you reach the desired point in the track, release the buttons and normal playback resumes. 8 HD7098_ib080802.p65 8 8/8/2002, 11:00 REPEAT PLAYBACK To repeat a single track: 1.) Press Play/Pause button to begin playback. 2.) When playback begins press or button to select the desired track. 3.) Press the MODE button once until the Repeat “ 1” indicator appears in the display. The selected track will be repeated indefinitely. 1 3 2 1 To repeat the entire disc: 1.) Press Play/Pause button to begin playback. 2.) When playback begins press the MODE button twice until the Repeat All “ ALL” indicator appears in the display. The entire disc will be ALL repeated indefinitely. To cancel repeat playback: • Press the STOP button, or; • Press the MODE button until no special mode indicators appear in the display. 9 HD7098_ib080802.p65 9 8/8/2002, 11:00 INTRO SCAN This feature plays only the first 10 seconds of each track on the disc. 1.) At stop mode press the MODE button 3 times. The “INTRO” indicator appears in the display. 2.) Press PLAY/PAUSE button to begin playback. 3.) The player begins track 1 and plays just the first 10 seconds of each track on the disc. When the first 10 seconds of each track has been played, the player stops. INTRO To cancel Intro Scan press the STOP button or press the MODE button until none of the special playback mode indicators appear in the display. SHUFFLE (Random) PLAYBACK Use Shuffle playback to play all the tracks on a disc in a random order selected by the CD player. 1.) At stop mode press the MODE button 4 times. The SHUF “SHUF”indicator appears in the display. 2.) Press PLAY/PAUSE button to begin playback. 3.) The player randomly selects the first track for playback and continues randomly selecting tracks until every track on the disc has been played once. After all tracks have been played the player stops. To cancel Shuffle playback, p...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories