Évaluations - 4, GPA: 3.5
(
)
)
|
Facilité d'utilisation
To maximize your listening satisfaction, take a few minutes to carefully review all sections of this guide. Note: The following instructions also include the functions of the optional dealer-installed trunk-mounted compact disc changer. Not available in station wagon models. 1432.doc 1 RADIO FUNCTIONS BASIC CONTROLS DISPLAY PANEL TUNING 1 Power Button 1 Indicator for Tone Control 1 Wave Band and Station Recall Buttons 2 Volume Bar 2 Stereo Indicator 2 Function Control Button 3 Bass Control/Balance Left Button 3 Indicator for Tuner Frequency, Antitheft Code and Balance Setting 3 Tuning Sensitivity Button 4 Treble Control/Balance Right Button 4 Indicator for Selected Station Recall Button 4 Seek Tuning Bar 5 Mode Button (Selection of Operating Mode) 5 Wave Band Indicator 5 Scan Tuning Bar 6 Indicator for Tuning Sensitivity Setting 6 Manual Tuning - Increasing Station Frequency 7 Manual Tuning - Decreasing Station Frequency 1432.doc 2 CASSETTE PLAYER FUNCTIONS BASIC CONTROLS DISPLAY PANEL CASSETTE OPERATION 1 Power Button 1 Indicator for Tone Control 1 Reverse Music Search/Fast Rewind Button 2 Volume Bar 2 Indicator for Antitheft Code, Balance Setting and Cassette Functions 2 Forward Music Search/Fast Forward Button 3 Bass Control/Balance Left Button 3 Indicator for Dolby® B and C Button 3 Track Selection Button, Eject Button (Push and Hold) 4 Treble Control/Balance Right Button 4 Tape Selection Button 5 Mode Button (Selection of Operating Mode) 5 Dolby® B and C Button 6 Cassette Port 1432.doc 3 COMPACT DISC CHANGER FUNCTIONS BASIC CONTROLS DISPLAY PANEL CD OPERATION 1 Power Button 1 Indicator for Tone Control 1 Function Control Button 2 Volume Bar 2 Indicator for CD Function 2 Disc Selection Buttons 3 Bass Control/Balance Left Button 3 Disc Indicator 3 Forward Music Search/Fast Forward Button 4 Treble Control/Balance Right Button 4 Track Indicator 4 Reverse Music Search/Fast Reverse Button 5 Mode Button (Selection of Operating Mode) 5 Random Track Play Indicator 5 Number of Track Display Button 6 Random Track Play Button 7 Elapsed Playing Time Button 1432.doc 4 BASIC CONTROLS Power: The sound system will operate with the car's ignition switch in either the PWR on or off position. To operate the radio or the optional CD changer, simply push the power button located at the lower left corner of the radio faceplate. Pushing the power button again will turn the radio off. A tape cassette can be played without using the power button by simply inserting the tape into the cassette port. As soon as the cassette is drawn into position, it will begin to play. Mode: Pushing this button repeatedly will cause the radio to cycle through each of its MODE operating modes: tuner, cassette player and CD player (if so equipped). Volume: Sound level is adjusted by means of the volume bar located on the left side of the radio faceplate. Press VOLUME upward to increase volume or downward to decrease volume. Speed-Dependent Volume Adjustment: A special function adjusts the volume of sound a preset amount according to vehicle speed. Thus, increased wind and road noise are compensated for as the vehicle is driven faster. When vehicle speed and thus ambient sound level drop, the volume is automatically lowered a preset amount. Tone: Two tone buttons, identified by musical notes, are located above the volume bar. The left button controls bass, and the right controls treble. A bar graph at the left of the radio display indicates relative bass and treble settings. To bring both bass and treble tones to their midrange settings, press both buttons simultaneously. To bring either bass or treble tone to maximum level, press and hold the respective button. If the button is d p released and then pressed again, the tone level will move toward its minimum level. To reverse adjustment direction, the maximum level must be reached first. The system is equipped with a memory function that will store the adjustment tone levels of AM, FM, cassette and optional CD modes separately. 1432.doc 5 Balance: Left-to-right stereo balance is adjusted using the same buttons that control bass and treble levels. First press the function control button, which is on the right side of the display and marked with a star "*". To shift sound balance to the left speakers, press the bass control button. To shift balance to the right speakers, press the treble control button. Balance can be set to the mid-position by pressing both buttons simultaneously. A visual indication of the * d p balance setting is provided on the display when the balance feature is activated. Fader: A fader control is provided on models equipped with both front and rear speakers. Located on the lower console near the gear selector, this thumbwheel control can be adjusted to suit your preference. Dialing the thumbwheel forward will increase output of the front speakers while reducing that of the rear. Conversely, dialing the thumbwheel backward will increase output of the rear speakers, while reducin...