Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
4 Within 10 seconds, press and hold -/J for at least 2 seconds to erase the title displayed. 5 Press TITLE to cancel the title erasing mode. • You cannot erase CD-TEXT. • "TITLE NO DATA" ("NO DATA") is displayed for 2 seconds if the title is not input in step 2, or if all titles are erased in step 4. Displaying Time Press TITLE repeatedly until the time is displayed. Each press changes the display. For details, see “Displaying the Title/Text” (page 22). • Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. • When the power is off but the ignition key is on, press TITLE to display the time (CDA-9853 only). Blackout Mode On and Off (CDA-9855 only) When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality. Press and hold FUNC. for at least 2 seconds to activate the blackout mode. The display will turn off. • If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold FUNC. for at least 2 seconds. 24-EN Setting Amplifier Link When an Amplifier Link compatible amplifier (MRD-M1005 or MRD-M605, etc.) is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 external amplifiers can be adjusted. 1 Press and hold MENU for at least 2 seconds. 2 Select the Amplifier Link (A-LINK) mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Amplifier Link (A-LINK) mode. 3 Select the AMP-ID (AMP-1 to AMP-8) to be adjusted by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired AMP-ID. The input level mode to be adjusted is activated. If a Mono Amplifier is Connected 4 Adjust the input level by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level. If a 4ch Amplifier is Connected 4 Adjust the input level of CH 1/2 by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level. 5 Adjust the input level of CH 3/4 by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired level. 6 When adjustment has been completed, press and hold MENU for at least 2 seconds to return to normal mode. • For details of each of the settings, refer to the Owner's Manual of the external amplifier. • If amplifier settings are made on the unit, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the unit. • “No Link” is displayed if the amplifier is removed or its power cannot be turned on, etc. • If multiple amplifiers are connected to this unit, set a different ID on each amplifier. Otherwise the display may flicker. • External amplifier information display can be changed by pressing TITLE while adjusting the input level. • If the GlideTouch bar is pressed and held while adjusting the input level, the amplifier link mode can be switched between lock and unlock. •If MENU is pressed while adjusting or setting the itmes in the MENU mode, the unit will return to the previous selection secreen. • By pressing the GlideTouch bar under RETURN in the MENU mode, the unit will return to the normal mode. • If no peration is performed in 60 seconds, the unit will return to the normal mode. Displaying the External Amplifier Information When an Amplifier Link compatible amplifier is connected, the amplifier's status (voltage, temperature and fan status) can be shown in the head unit's display. 1 Press TITLE in the Radio or CD mode to switch the display of the external amplifier information. • For switching the display, refer to the section “Displaying the Title/ Text” (page 22). • For changing the XM display, refer to the section “Changing the Display” (page 32). • For changing the iPod display, refer to the section “Displaying the Text” (page 36). CDA-9855 VOLTAGE:10.1V 75.0.F Voltage Display Temperature Display The temperature display and the fan status display are alternately displayed. VOLTAGE:10.1V HIGH Voltage Display Fan Status Display CDA-9853 Fan Status Display 42.0°C 12.4V HIGH Voltage Display Temperature Display • To switch the display between Celsius and Fahrenheit, refer to page 30. 25-EN Setting the Multicolor Illumination (CDA-9855 only) You can change the lighting colour of the following four buttons : SOURCE/POWER, BAND, g and f. 1 Press MENU. 2 Select the Multicolor mode by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the Multicolor mode. 3 Change the color by sliding your finger on the GlideTouch bar to the left or right. Press the GlideTouch bar under the desired co...
Ce manuel est également adapté pour les modèles :CD-joueurs - CDA-9853 (1.19 mb)