Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
Press the SET CUE BUTTON (15) (the LED will light). Use the DIRECT ACCESS (2) buttons to memorize the spot at which you want play to start, the CUE POINT, by selecting the proper track, minute, second and frame. Press CUE 1 to set the cue to CUE 1 (press CUE 2 if you wish to set the cue to CUE 2). You can do this in any mode, including PLAY MODE, so that you may cue a track while playing a track. SUGGESTION: To avoid confusion while setting cue points, keep the time display in ELAPSED TIME mode. When you use the DIRECT ACCESS BUTTONS to set a cue, the track, minute, second and frame are always in elapsed time. If the unit’s time display is in TRACK REMAIN or TOTAL REMAIN mode, the track, minute, second and frame displayed will be the remain time and not the the track, minute, second and frame you entered. ROBO START INSTRUCTIONS IN SINGLE-AUTO CUE MODE: Use ROBO START in SINGLE-AUTO CUE MODE to alternate play between the two sides of the CD player (one track from one side, then one track from the other side). In SINGLE-AUTO CUE MODE play starts immediately from the start of music without any blank space (which exists at the beginning of every track). ROBO START causes one side of the CD player to play, while the other side is paused. 1. Engage SINGLE-AUTO CUE MODE with the SINGLE-AUTO CUE/ CONTINUOUS (12) button. 2. Press the ROBO START (1) button to activate ROBO START (the button will blink). Play will alternate between the two sides of the CD player. At the end of the track, the playing side will pause, and the other side will play. At the end of this track, the playing side will pause, and the other side will play. The CD player will continue to alternate between the two sides until you stop it (after the last track of the CD, it goes back to the first track). NOTE: Pausing the playing side in the middle of a track will cause the other side to play. When that track ends, play will begin from the middle of the track where play was paused. IN CONTINUOUS MODE OR DURING NORMAL PLAY: If you use ROBO START without SINGLE-AUTO CUE MODE (in CONTINUOUS MODE or during normal play), play will not alternate automatically. Pressing pause on the playing side will cause the other side to play. 1. During normal play, set a cue point on the other side of the CD player. 2. Press the ROBO START (1) button to activate ROBO START (the button will blink). 3. Press PLAY/PAUSE (22) on the playing side to begin play from the cue point on the other side. PROGRAMMING INSTRUCTIONS 1. To program the unit to play songs in the order you select using the DIRECT ACCESS (2) buttons, follow these instructions: In stop mode, press the PROGRAM BUTTON (12) and then choose the tracks you wish to play by pressing the DIRECT ACCESS (2) buttons. Press the PLAY/PAUSE (22) button to play your programmed selections. 2. To program the unit to play songs in the order you select using the TRACK SKIP (19) buttons, follow these instructions: In stop mode, press the PROGRAM BUTTON (12) and then choose the track you wish to play using the TRACK SKIP (19) buttons. Press the PROGRAM BUTTON (12) to save the track. Repeat the process until you are ready to start playing your selections. Press the PLAY/PAUSE (22) button to play your programmed selections. 3. To clear items from your program, press the STOP/CLEAR BUTTON (18). SUGGESTION: In AUTO CUE mode, use the PROGRAM function with ROBO START to create a music mix that will play without interruption. The unit will play the programmed songs while alternating between the two sides of the unit. TROUBLE SHOOTING • If the disk will not play, check to see if the disc was loaded correctly (label side up). Also check the disc for excessive dirt, scratches, etc. • If the disc turns but there is no sound, check the cable connections. If they are okay, check your amplifier or receiver. • If the CD skips, check the CD for dirt or scratches. Do not assume that the CD player is defective. Many CDs are recorded out of spec and will skip on most or all CD players. Before sending the unit in for repair, try playing a CD that you are sure plays properly. Page 5 SPECIFICATIONS GENERAL: Type...........................Dual Mechanism Compact Disc Player w/wired remote Disc Type........................................Standard Compact discs (12 cm & 8 cm) Time Display............................Track Elapsed, Track Remain, or Total remain Variable Pitch..............................................± 16% Slider with Resume Switch Pitch Bend..............................................................................± 16% Maximum Instant Start...................................................................Within 0.015 seconds Track Selection..........................................................................1 to 99 Tracks Installation..............................................19" Rack Mountable Player Unit, 2 U 19" Rack Mountable Control Unit, 2 U AUDIO SECTION: Quantization............................................1 ...