Évaluations - 4, GPA: 4.5
(
)
)
|
Facilité d'utilisation
SEARCH Up ( ) / Down ( ) Buttons 5 Selecting tracks (in CD changer mode or CD mode) Press the SEARCH Up button 5 to start playback from the beginning of the following track. Press the SEARCH Down button 5 to start playback from the beginning of the current track. If pressed again, the track moves to the previous one. Fast-forward and fast-backward (in CD changer mode or CD mode) Press and hold the SEARCH Up button 5 to fast-forward the disc. Press and hold the SEARCH Down button 5 to fast-backward the disc. * Pressing and holding the SEARCH Up/Down buttons for 1 second or longer will move forward or backward 3 times faster than normal play, and pressing and holding it for 3 seconds or longer will do the operation 30 times faster. Changing preset stations (in the Radio mode) Each time the SEARCH Up/Down buttons 5 are pressed, the pre set station switches in the following order: 1 . 2 . 3 . 4 . 5 . 6 . 1..... or 6 . 5 . 4 . 3 . 2 . 1 . 6..... XMD1/XMD2 6. HANDLING COMPACT DISCS 6. HANDLING COMPACT DISCS This unit has been designed specifically for playback of compact Note on Compact Discs discs bearing the mark. No other discs can be played. To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Removing the disc Proper way to hold the compact disc Always handle the compact disc by the edges. Never touch the surface. To remove fingermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference. No New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc. Ball-point pen Roughness Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. No Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. No Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage. No Do not expose compact discs to direct sunlight or any heat source. No Note: • Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc.These may get caught in the internal mechanism and damage the disc. XMD1/XMD2 6 XMD1/XMD2 Turning ON the Power and Adjusting the Volume 1) Press the POWER button 4. . To turn off the power, press the POWER button 4 for 1 second or longer. 2) Press the FUNC button 4 and select another operation mode. Every time the FUNC button 4 is pressed, the display changes the operation mode as: Radio . CD . CD changer . Radio Notes: • The operation mode not connected to the unit will not be selected. • If the CD mode is selected when no disc is inserted, the display flashes “DISC”. 3) Use the volume button 1 to adjust the volume. w: Increases the volume. z: Decreases the volume. . The volume level is from 0 (minimum) to 33 (maximum). Audio Mode Adjustments Press the A-M button # to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS . TREB . BAL . FAD . Previous mode Adjusting the Bass 1) Press A-M button # and select “BASS”. 2) Press volume button 1w to emphasizes the bass; press z to attenuates the bass. . The factory default setting is “0”. (Adjustment range: –6 to +6) 3) When the adjustment is complete, press A-M button # several times until the function mode is reached. Adjusting the Treble 1) Press A-M button # and select “TREB”. 2) Press volume button 1w to emphasizes the treble; press z to attenuates the treble. . The factory default setting is “0”. (Adjustment range: –6 to +6) 3) When the adjustment is complete, press A-M button # several times until the function mode is reached. 7. OPERATION Note: • Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3. When this unit is turned on, starting and stopping the engine of a boat with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume. CAUTION Basic Operations Adjusting the Balance 1) Press A-M button # and select “BAL”. 2) Press the volume w emphasizes the sound from the right speaker; press the volume z emphasizes the sound from the left speaker. . The factory default setting is “0”. (Adjustment range: L9 to R9) 3) When the adjustment is complete, press A-M button # several times until the function mode is reached. Adjusting the Fader 1) Press A-M button # and select “FAD”. 2) Press the volume w emphasizes the sound from the front speakers; press the volume z emphasizes the sound from the rear speakers. . The factory default setting is “0”. (Adjustment range: F9 to R9) 3) When the adjustment is complete, press A-M button # several times until the function mode is reached. Setting the Z-enhancer This unit comes with three types of sound tone effects stored i...
Ce manuel est également adapté pour les modèles :CD-joueurs - AM/FM CD PLAYER XMD1 (1.1 mb)