Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
If you are connecting the CD changer to a receiver that supports Dual-Zone/Dual-Source listening (such as the VR-4900/KRF-V9993D shown in the illustration), connect audio cables for both outputs A and B to the appropriate jacks on the receiver. 3.Connect an optional optical digital cable from the changer to the receiver as shown to the left. If your receiver does not support digital output, skip this step. If you do not connect a digital cable or if your receiver does not support digital output and DTS decoding, DTS discs do not play on your changer. 4.Connect the system control cable from the changer to the receiver jack as shown to the left. If your receiver has the SL16/XS8 mode select switch, set the connected receiver to the [SL16] mode. If you are connecting more than one Kenwood device with a system control cable, see “What if I Have Several Kenwood Devices ?” for more information. 8 5.Connect the SL16 text cable (Communication cable) from the changer to the receiver’s jack as shown to the left. 6.Plug the changer’s power cable into a wall outlet or power strip. 7.Plug the receiver’s power cord back into a wall outlet or power strip. To Connect the Changer to a Non-Kenwood Receiver or Preamplifier 1. Unplug the receiver or preamplifier from the wall outlet or power strip. 2. Connect the audio cable(s) from output A on the CD changer to the receiver or preamplifier as shown to the left. 3. Connect an optional optical digital cable from the changer to the receiver or preamplifier as shown to the left. If your receiver does not support digital output and DTS decoding, skip this step. If you do not connect a digital cable or if your receiver does not support digital output, DTS discs do not play on your changer. 4. Plug the changer’s power cable into a wall outlet or power strip. 5. Plug the receiver’s power cable back into a wall outlet or power strip. To Connect the Digital Output Directly to a Digital Recorder (MD, DAT, etc.) If your receiver does not support digital output, but you want to record discs to a digital format, you can connect the CD changer directly to a digital recording device, such as an MD or DAT recorder. 1. Unplug the digital recorder from the wall outlet or power strip. 2. Connect the digital cable from the changer to the recorder. 3. Plug the changer’s power cable into a wall outlet or power strip. 4. Plug the recorder’s power cable back into a wall outlet or power strip. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”. q Chapter 1 System Control Chaining What if I Have Several Kenwood Devices ? System control allows you to : O control connected devices via the receiver’s remote control O switch the receiver’s input automatically to a connected device when you start playback from that device O synchronize recording a CD or MD automatically when you start playback from those connected devices Receiver or Amplifier Chapter 1 This unit Cassette deck or MD SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL This unit is compatible only with the [SL16] mode. The system control operation is not available if the unit is connected in the [XS-8] connection mode. OYou can connect the system control cord to either system control jack of the unit. OIf your component has the mode select switch, set the connected components to the [SL16] mode. (Ensure that the power plug is not connected.) NotesNotes 1. If your amplifier or receiver does not support system control, do not connect the system control cable to any device. 2. Some CD players and cassette decks do not support the SL16 system control mode. Do not include these devices in a set of SL16 chained connections. 3. Do not connect system control cables to any device not specified by Kenwood. Using system control functions with a device that does not support them can damage the device. 4. Make sure system control plugs are firmly seated in the appropriate jacks. 9 Connecting to a Receiver or Amplifier Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Setting Up the 10-key Remote and Keyboard 10-key Remote Keyboard 1Remove the cover. 2Insert two AA batteries. 3Close the cover. O Insert two AA-size (R6) batteries as indicated by the polarity marking. To load Batteries O The batteries that came with your new CD changer are intended to be used for operation checks and setup. Therefore, they may not last as long as ordinary batteries. Consider replacing them as soon as you have verified that the remote operates correctly. O When the remote’s operating range gets shorter, replace both batteries. O Do not install the CD changer where direct sunlight or high-frequency fluorescent lighting can shine directly into the remote sensor. This can decrease the operating range of your remote. O When pressing more than one remote control key successively, press the keys securely by leaving an int...
Ce manuel est également adapté pour les modèles :CD-joueurs - DPF-J9030 (1 mb)