Évaluations - 2, GPA: 3.5 ( )

Fabricant : Kenwood Taille : 620.98 kb Nom Fichier : Langue d'enseignement:

1 Select the desired track No. Press the numeric keys as shown below.... To enter track No. 25: 005 Go to step 2 within 5 seconds. 3 Repeat steps 1 and 2 above. 0 +10 7 8 9 4 5 6 1 2 3 P.MODE 6 PLAY/PAUSE : Keys and control used in the operations described on this page. Lights up. PGM TRACK NO. 01 Displays the entered program No. Displays the total playing time for a few seconds. of the programmed tracks. TRACK TRACK NO. NO. TOTAL TIME 02 P_ 01 02 _16:42 OUp to 20 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed. OIf you make a mistake, press the CLEAR key and enter the track No. from the beginning. OWhen the total playing time of the programmed tracks exceeds 100 minutes, the remaining time on the disc will not be displayed any more. OWhen the 4 or . key is pressed during playback, the track will be skipped in the direction of the pressed button. OWhen the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played. To stop playback OThe programmed contents remain in memory. 7 STOP To check or change the programmed tracks Lights up. DPF-3010/2010/1010 (En) Auto space function During programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By recording tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably. OEven when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track numbers. TRACK NO. 6P.C. 3 PGM 06P_02 OPerform only step 1 to simply check the program. OEach time the key is pressed, the program No. (P-No.) and the track No. on CD are displayed. OThe previous display resumes in a few seconds. OPress it while the “P.C.” indicator is lit. OThe track being played cannot be changed. 1 Press the CHECK key. Press until the track No. to be changed is displayed. 2 Select the new track No. 3 Set the entry. CHECK 0 +10 7 8 9 4 5 6 1 2 3 P.MODE To add a track to the program 1 Select the desired track No. 2 Press the P.MODE key. 0 +10 7 8 9 4 5 6 1 2 3 OWhen a track No. is selected, the track will be added to the end of the existing program. To clear tracks from the program Press to clear tracks from the end. To clear all track. CLEAR P.MODE OEach time the key is pressed, the last track in the program is cleared. OThe tracks which are programmed earlier than the track being played cannot be cleared. OSelected tracks can be also completely cleared just by operating the 0 key. OThe entire program is cleared. Repeated playback DPF-3010/2010/1010 (En) 16 Preparation 1 A 4 7 6 . The figure shows an example for the DPF-3010 O Load a disc in the CD player. @ : Keys and control used in the operations described on this page. To repeat only the programmed tracks Lights up. TRACK NO. 01 PGM OAll of the programmed tracks will be repeated. OIn case only one track is programmed, only that track will be repeated. OUp to 20 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed. Lights up. TRACKPGM REPEATNO. 01 1 Press so that the "PGM" indicator lights. 2 Select the desired track No. Press the numeric keys as shown below... To enter track No. 25: 005 5 Switch REPEAT ON. 6 Start playback. 4 Repeat steps 2 and 3 above. Go to step 3 within 5 seconds. 3 Set the entry. Do this operation in the stop mode. P.MODE 0 +10 7 8 9 4 5 6 1 2 3 P.MODE REPEAT 6 PLAY/PAUSE To cancel repeated playback Press the REPEAT key again. REPEAT Goes off. TRACK NO. 01 PGM REPEAT DPF-3010/2010/1010 (En) The figure shows an example for the DPF-3010 1 A 4 7 6 . : Keys and control used in the operations described on this page. To repeat the entire disc 1 Press so that the “TRACK” indicator lights. 2 Switch REPEAT ON. 3 Start playback. Lights up. Lights up. 6 PLAY/PAUSE REPEAT P.MODE TRACK TRACK NO. 01 TRACK TRACK NO. REPEAT 01 To cancel repeated playback Press the REPEAT key again.Goes off. REPEAT TRACK TRACK NO. REPEAT 01 Editing DPF-3010/2010/1010 (En) 18 The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Preparation : Keys and control used in the operations described on this page. 1 A 4 7 6 . The figure shows an example for the DPF-3010 O Load a disc in the CD player. @ 1 1 Light the “EDIT” indicator. 2 Do this operation in the stop mode. Go to step 2 within 5 seconds. If more than 5 seconds have elapsed, press the key again. Enter the recording time of the tape. EDIT 0 +10 7 8 9 4 5 6 1 2 3 Lights up. Lights up. Blinks. EDIT PGM C___ Press the numeric keys as shown below. 30-minute tape : 000) 46-minute tape : 00006 ORecording within 99 minutes can be specified in minutes (2 digits). OWhile you can edit with a different time setting to that of the tape you are u...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :