Évaluations - 7, GPA: 4.1
(
)
)
|
Facilité d'utilisation
Do not adjust the output level from this unit particularly during recording. OPlease note that the sound output is at the maximum level when the power is turned on. System connections SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL NotesNotes SYSTEM CONTROL CONNECTIONS Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. This unit is compatible only with the [SL16] mode. The system con- trol operation is not available if the unit is connected in the [XS-8] connection mode. ODo this operation after completing all connections. (Ensure that the unit is set to POWER OFF.) 1. If your amplifier or receiver does not have a system control terminal, do not connect any system control cords to the system control termi- nals on the other components. 2. Do not connect system control cords to any components other than those specified by Kenwood. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals. SYSTEM CONTROL OPERATIONS Remote Control Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver. Automatic Operation Automatically switches the input selector on the amplifier or receiver when you start playback from this unit. Synchronized Recording Lets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation lets you make great recordings from CD. See the operating instructions supplied with your cassette deck and MD recorder for details. Maintenance Disc handling precautions Label side Playing side Sticker Handling Hold the discs so that you do not touch the playing surface. Do not attach paper or tape to either the playing side or the label side of the discs. Sticky paste Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Cleaning Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components. Discs which can be played with this unit DVD (12 cm, 8cm), CD (12 cm, 8 cm), VCD, and the audio part of CDV, CDG, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying COMPACT COMPACTCOMPACT the marking on the label surface. DIGITAL AUDIO DIGITAL AUDIODIGITAL AUDIO Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause a malfunction. Disc accessories The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. Note related to transportation and movement Before transporting or moving this unit, carry out the following operations. 1. Turn the power ON but do not load a disc. 2. Verify that the display shown appears. TRACK 6 1 11 16 7 2 12 17 8 3 13 18 9 4 14 19 10 5 15 20n od1SC 3. Wait a few seconds and set the unit to POWER OFF mode. Caution on condensation Condensation (of dew) may occur inside the unit when there is a Be specially cautious against condensation in a following circumstance: great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this When this unit is carried from a place to another across a large case, leave the unit for a few hours with the power left ON, and difference in temperature, when the humidity in the room where this restart the operation after the condensation has dried up. unit is installed increases, etc. Controls and indicators REPEAT indicator CCRS indicator Program SINGLE TIME indicator EDIT indicator check indicator TOTAL TIME indicator TRACK mode indicator Program mode indicator TRACK EDIT CCRS TRACK NO. P.C. TOTAL TIME SINGLE TIME 6 1 11 16 7 2 12 17 8 3 13 18 9 4 14 19 10 5 15 20 PGM A BREPEAT 8_:88888 TIME indicator, program No. Pause indicator Play track No. in- Play indicator Output level indicator Music calender dicator The figure shows an example for the DPF-2030 1 234 5 67 8 POWER -ON . OFF PHONES P.MODE EDIT CHECK CLEAR PEAK SEARCH TIME DISPLAY OPEN/CLOSE REPEAT RANDOM 0 7 6 4 . 1 A DISPLAY *9 0!@# $ %^& The keys with the same name as those on the remote control unit operate t...
Ce manuel est également adapté pour les modèles :CD-joueurs - DPF-2030 (784.56 kb)