Évaluations - 4, GPA: 3.8 ( )

Fabricant : Kenwood Taille : 617.67 kb Nom Fichier : Langue d'enseignement:

(up to 32 tracks) REMOTE CONTROL UNIT RC-P0601 Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. O Load a disc in the CD player.Preparation : Keys and controls used in the operations described on this page. 1 1 Press so that the “PGM” indicator lights. Do this operation in the stop mode. P.MODE 2 2 Program desired tracks. Start playback.34 Repeat steps 1, 2 and 3 above. 1 Select the disc. Go to step 2 within 8 seconds. 3 Set the entry. Go to step 3 within 8 seconds. 2 Select the desired track No. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 4 . 1 2 3 4 5 6 7 8 9 0 +10 P.MODE Main unit Remote control unit 6 Blinks. CD-206/DPF-R6010 GP0M1IDCS? CD-204/203/DPF-R4010/R3010 Light up. PGM 54321 GP0M11DTON?.? In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/ DPF-R6010 only) Press the numeric keys as shown below.... To enter track No. 25 : 005 CD-206/DPF-R6010 GP0M11DTON2.5 GP0M1BADCFEHG In the case of a CD-TEXT disc, the track's title is scrolled on the display. GP0M11DTON2.5 CD-204/203/DPF-R4010/R3010 TRACK NO. DISC 54321 PGM 25P_01 1 Track number OTracks can also be selected by pressing the 4 or . key. OUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed. OIf you make a mistake, press the CLEAR key and enter the track No. from the beginning. OWhen the 4 or . key is pressed during playback, the track will be skipped in the direction of the pressed button. OWhen the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played. Programmed play (PGM mode) CD-206/204/203/DPF-R6010/R4010/R3010 (En) 7 To stop playback OThe programmed contents remain in memory. To check or change the programmed tracks 1 Press the CHECK key. Press until the track No. to be changed is displayed. 2 Select the disc. 3 Select the new track No. 4 Set the entry. REMOTE CONTROL UNIT RC-P0601 Press until the track No. to be changed is displayed. CHECK CHECK CD-206/DPF-R6010 CD-204/203/DPF-R4010/R3010 DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Main unit Remote control unit 4 . 1 2 3 4 5 6 7 8 9 0 +10 P.MODE To add a track to the program CD-206/DPF-R6010 Blinks. DGP0M15TON2.5 CD-204/203/DPF-R4010/R3010 Light up DISC TRACK NO. 525 P_ 01 P.C. OPerform only step 1 to simply check the program. OIn the case of a CD-TEXT disc, the track's title is scrolled on the display. (CD-206/DPF-R6010 only) OEach time the key is pressed, the program No. and the track No. on CD are displayed. Example OPress it while the “PGM 01” indicator blinks.(CD-206/DPF-R6010 only) OPress the key while the “P.C.” indicator is lit. (CD-204/203/DPF-R4010/ R3010 only) OThe track being played cannot be changed. 1 Select the disc. 2 Select the desired track No. 3 Press the P.MODE key. 4 . 1 2 3 4 5 6 7 8 9 0 +10 Main unit Remote control unit DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 OWhen a track No. is selected, the track will be added to the end of the existing program. Programmed play (PGM mode) CD-206/204/203/DPF-R6010/R4010/R3010 (En) To clear tracks from the program Press to clear tracks from the end. To clear all tracks CD-206/DPF-R6010 CD-204/203/DPF-R4010/R3010 REMOTE CONTROL UNIT RC-P0601 CLEAR CLEAR P.MODE OEach time the key is pressed, the last track in the program is cleared. OThe tracks which are programmed earlier than the track being played cannot be cleared. OSelected tracks can be also completely cleared just by operating the 0 key. OThe entire program is cleared. To program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only) 3 Press the P. MODE key again. 2 Select the desired disc. 1 Press so that the "PGM" indicator lights. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 P.MODE P.MODE ALL 109876 54321 P_01ALL indicator lights up. Auto space function During programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By record-OEven when the performances of two tracks are continuous (which ing tracks with these spaces on tape, the search and repeat play occurs with classical or live recording music), the spaces will be operations of tape using the DPSS function (which works by created if they have different track Nos. searching the non-recorded spaces) can be performed reliably. Time display on CD player (TIME DISP.) Each press of the TIME DISP. (TIME DISPLAY) key changes the displayed contents. Do this operation in the play mode. TIME DISP. CD-206/DPF-R6010 1 1:23 : Elapsed time of track being played 2 -2:23 : Remaining time of track being played 3 23:45T : Elapsed time of entire disc (T lights up.) 4 -36:25T : Remaining time on entire disc (T lights up.) CD-204/203/DPF-R4010/R3010 1 1:23 : Elapsed time of track being played (SINGLE lights up.) 2 -2:23 : Remaining time of track being played (SINGLE lights up.) 3 23:45 : Elapsed time of entire disc (TOTAL lights up.) 4 -36:25 : Remaining time on entire disc (TOTAL lights up.) OOnly the display 1 and 2 will be displayed in PGM, RANDOM and ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :