Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 412.89 kb Nom Fichier : Langue d'enseignement:

• For MW , the set uses a built-in aerial. Direct this aerial by turning the whole set. Programming radio stations You can store up to a total of 30 radio stations (20 FM and 10 MW) in the memory, manually or automatically (Autostore). Manual programming 1. Tune to your desired station (see Tuning to radio stations). 2. Press PROG to activate programming. ™ PROG flashes. 3. Press PRESET + / - once or more to select a preset number. • Remote control (AZ1305 models only): Press PRESET + / - once or more to select a preset station. 4. Press PROG to confirm. 5. Repeat steps 1-4 to store other stations. Note : You can erase a preset station by storing another frequency in its place. Autostore Autostore automatically starts programming radio stations from preset 1. Available stations are programmed in order if the station with sufficient reception strength. Any previous presets e.g. manually programmed will be erased. • Press PROG for 2 seconds or more to activate autostore programming. ™ The display shows AUtO, PROG blinks, followed by the radio station details when stored. After all stations are stored, the first preset station will then automatically play. To listen to a preset station • Press the PRESET + ,- buttons once or more until the desired preset station is displayed. • Remote control (AZ1305 models only): optionally, press PRESET + ,- to select your preset station. Playing a CD This CD player plays Audio Discs including CDRecordables and CD-Rewritables. 1. Adjust the POWER slider to CD. 2. Open the CD Door. ™ OPEN is displayed. 3. Insert a CD with the printed side facing up and close the door. ™ nocd if no CD inserted/ CD dirty, incorrectly inserted or damaged. ™ nFcd if you have inserted a non-finalized CDR( W). 4. Press 2; to start playback. ™ dAtA if your CD contains non-audio i.e. data files. 5. To pause playback press 2;. Press 2; again to resume play. ™ Display: 1 flashes during pause. 6. To stop CD playback, press the 9 button. Note : CD play will also stop when: - the CD door is opened - the CD has reached the end - you select MW / FM function. Selecting a different track • Press SEARCH .or §once or repeatedly to select your track. • In the pause / stop position, press.2; to start playback. Finding a passage within a track 1. Press and hold SEARCH .or §. – The CD is played at high speed and low volume. 2. When you recognize the passage you want, release .or §to resume normal playback. Note : During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within a track. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback, and combine the modes with PROG. (See 4) (SHUFFLE) - tracks of the entire CD/ program are played in random order (SHUFFLE REPEAT ALL) - to repeat the entire CD/ program continuously in random order (REPEAT ALL) - repeats the entire CD/ program (REPEAT) - plays the current track continuously 1. To select play mode, press MODE once or more. 2. Press 2; to start playback if in the stop position. 3. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. – You can also press the 9 button to cancel your play mode. DIGITAL TUNER DIGITAL TUNER CD PLAYER CD PLAYER Meet Philips at the Internet Printed in China W CLASS 1 LASER PRODUCT AZ 1300 AZ 1305 English Francais Espanol Deutsch Nederlands Programming track numbers In the stop position, select and store your CD tracks in the desired sequence. Up to 20 tracks can be stored in the memory. 1. Press SEARCH .or §on the set to select your desired track number. 2. Press PROG. ™ Display: PROG, Prog briefly and your selected track number. (See 5) ™ If you attempt to program without first selecting a track number, noSE is shown. 3. Repeat steps 1-2 to select and store all desired tracks. ™ Display: FULL if you try to program more than 20 tracks. Reviewing the program In the stop position, press and hold PROG until the display shows all your stored track numbers in sequence. Erasing a program You can erase the program by either: • pressing 9 twice ™ CLr is displayed briefly and PROG disappears. • You select MW / FM function. • Open the CD door. SAFETY & MAINTENANCE INFORMATION (See 7) • Don't expose the set, batteries, CDs to humidity, rain, sand or excessive heat. • Clean the set with a dry cloth. Don't use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the set. • Place the set on a hard and flat surface so that the system does not tilt. Make sure there is good ventilation to prevent the set overheating. • The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. CD player and CD handling • If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. • The lens of the CD player should never be touched! • Sudden changes in the surrounding temperature can cause condens...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :