Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
For Audio CD: In the stop position, press PROG to activate programming. . Display: PROGRAM and P01 flash, indicating the star t of the program. (See 8) 2 Press § or . to select your desired track number. . Display: PROGRAM and your desired track number flash. 3 Press PROG to store the desired track number. . Display: PROGRAM and P02 flash, indicating the next program location available. 4 Repeat steps 2 to 3 to select and store all desired tracks in this way. . ‘’PROGRAM” and --flash after 20 tracks are stored. 5 To play your programme, press 2;. For MP3: 1 In the stop position, press PROG to activate programming. . Display: PROGRAM and P01 flash, indicating the star t of the program. 16 CD/MP3 player 2 If necessar y, press ALBUM+ to select another album. . Display: ALBUM and selected album number (See 9) 3 Press § or . to select your desired track number. . Display: the selected track number in current album. 4 Press PROG to store the desired track number. . Display: PROGRAM and P02 flash, indicating the next program location available. 5 Repeat steps 2 to 4 to select and store all desired tracks in this way. . ‘’PROGRAM” and --flash after 20 tracks are stored. 6 To play your programme, press 2;. Helpful hints: – When playback of PROGRAM or SHUFFLE is active, use of the ALBUM+ keys are void. Reviewing the program In the stop position, press and hold PROGRAM to see your store track numbers. . The stored track numbers are displayed in the sequence. MP3 only: ALBUM and an album number appear, then a stored track number in the album is displayed. Helpful hints: – Display shows flashing P01 if no track is programmed. Erasing the program You can erase the contents of the memor y by: – pressing STOP 9 (twice during playback or once in the stop position); – selecting TUNER or TAPE sound source; – opening the disc door. . Display: PROGRAM disappears. English 17 Cassette Recorder English Cassette playback 1 Push the Source selector slider to TAPE 2 Press STOP•OPEN 9/ to open the cassette holder and inser t a cassette and close the deck. 3 Press PLAY 1 to star t playback. 4 To pause playback press PAUSE ;.To resume, press the key again. 5 To stop the tape, press STOP•OPEN 9/. Fast forwarding/ rewinding 1 Press F.FWD/REW 5 or 6 unti you reach your desired passage. 2 Press 9/ to stop fast for- warding/rewinding. Helpful hints: – During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE ; mode has been activated.) – During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released. General information on recording • Recording is permissible insofar as copyright or. other rights of third par ties are not infringed. • For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. • The best recording level is set automatically. Altering the VOLUME or DBB will not affect the recording. • To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. 18 Cassette Recorder English Recording from the CD Player Recording from the Radio 1 Select CD/MP3 source. 1 Select TUNER source. 2 3 4 Inser t a CD and if desired, program track numbers. Press 9/ to open the cassette holder. Inser t a blank tape and close the deck. Press REC 0 to star t recording. 2 3 Tune to the desired radio station (see Radio reception). Follows steps 3, 4, 6,7 under Recording from the CD Player. 5 Press 2; to star t CD playback. 6 For brief interruptions press PAUSE ;.To resume recording, press ; again. 7 To stop recording, press 9/. The making of unauthorized copies of copy-protected material, including computer programmes, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. 19 English Maintenance (see 0) Tape deck maintenance CD player and CD handling To ensure quality recording • If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. • The lens of the CD player should never be touched! • Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. • Always close the CD-tape door to avoid dust on the lens. • To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. • Never write on a CD or attach any stickers to it. and playback of the tape deck, clean par ts A, B and C as shown, once a month. Use a cotton bud slightly moistened with alcohol or a special head clean...