Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your CD Soundmachine. The model number and serial number are on the bottom of your CD Soundmachine. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install batteries Note • You can use both batteries and AC power as power supply of this CD Soundmachine. • Batteries are not supplied with the accessories. Open the batter y compar tment. 2 Insert 6 x 1.5V R14/UM-2/C-cell batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. 6 x 1.5V R-14/UM-2/C-cell Connect AC power Warning • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the CD Soundmachine. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Note • Install the unit near the power supply socket and where the AC power plug can be easily reached. Connect the power cord to the AC MAINS~ socket on the CD Soundmachine and to the power supply socket. • To switch the CD Soundmachine off completely, disconnect the power cord from the power supply socket. Tip • To save energy: After use, set the switch to OFF. Use your CD Soundmachine Play a CD Note • You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs: • • • CD-Recordables (CD-R) CD-Rewritables (CD-RW) MP3-CDs 1 Switch the source selector to CD. 2 Lift the lid of the CD compar tment. 3 Inser t a CD with the printed side facing up. 4 Close the CD lid gently. » The total number of tracks is displayed. 5 Press to star t play. » [ ] is displayed. • To pause CD play, press . • To resume CD play, press again. • To stop CD play, press . Select a track During play, press TUNING to select a track. / Select an album For MP3-CDs only. 1 During play, press ALBUM/PRESET +/- to select an album. Find a passage within a track 1 During play, press and hold TUNING » The CD is played at high speed and with reduced volume. 2 Release TUNING to resume normal play. / . / Tip • When search reaches the end of the last track, the CD stops. Select play modes Repeat play You can repeat a track, an MP3 album, a disc, or a program. • [ ] – Repeat a track • [ ALB] – Repeat an album • [ ALL] – Repeat an entire CD/program During play, press MODE repeatedly until the display shows the repeat icon. • Repeat a track. • Repeat an album. • Repeat a program. • To stop repeat play, press MODE repeatedly until the repeat icon is no longer displayed. Shuffl e play You can play all tracks in random order. During play, press MODE repeatedly until the display shows the shuffl e icon. • To stop shuffle play, press MODE again. Program play sequence You can store up to 20 tracks in the desired sequence. 1 In stop mode, press PROG to star t to program play sequence. » [PROG] and [P01] are displayed. 2 For MP3-CDs: press ALBUM/PRESET +/-to select an album. 3 Press TUNING to select a track. 4 Press PROG to store the track. » [PROG] and [P02] are displayed. / Repeat steps 2 to 4 to select and store all tracks. » When all 20 tracks are stored, no more tracks can be selected and the display shows [PROG] and [---]. To play program, press . • In stop mode, press PROG repeatedly to browse stored tracks. • To cancel program, press twice. Tip • When program play stops, the CD Soundmachine returns to normal play.To play program again, repeat steps 1 to 6. Listen to radio 1 Switch the source selector to FM or MW. 2 Press and hold TUNING / until the frequency in the display star ts to run. » When the CD Soundmachine finds a station with strong signals, it begins to broadcast that station. 3 Repeat step 2 until you find a station. • To tune to a weak station, press TUNING repeatedly until you find optimal reception. / Tip • To improve FM reception, you can extend, incline or turn the telescopic antenna for best reception. • To improve MW reception, turn the CD Soundmachine to face a different direction. Program radio stations You can program up to 20 preset radio stations for later listening. Automatic programming Automatic programming star ts at preset station 1 and all your former preset stations are overwritten. 1 Press and hold PROG. » All available stations are programmed. Manual programming 1 Tune to a radio station. 2 Press PROG to star t programming. 3 Press ALBUM/PRESET +/- to allocate a number to this station and press PROG. 4 Repeat step 1-3 to program other stations. Tip • You can overwrite a preset station by programming another frequency in the same number. Tuning to preset radio stations 1 Press ALBUM/PRESET +/- repeatedly until the desired station is displayed. Troubleshooting Warning • Never rem...