Évaluations - , GPA: ( )

Instructions Philips, Modèle AZ100N/12

Fabricant : Philips
Taille : 821.88 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

The unit supports the following media format: What's in the box EN 3 3 Get started Always follow the instructions in this chapter in sequence. Install batteries Note • The batteries contain chemical substances, so they should be disposed of properly. 1 Open the batter y compar tment. 2 Inser t 6 x 1.5 V R14/UM2/C CELL batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. 6 x 1.5 V R14/UM/C CELL Connect power Caution • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the device. • Before connecting the AC power cord, make sure that you have completed all other connections. 4 EN 4 Use your CD Soundmachine Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at philips.com. Play disc Note • You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs: • CD-Recordables (CD-R) • CD-Rewritables (CD-RW) • MP3-CDs • WMA-CDs 1 Open the disc compar tment. 2 Inser t a disc with the printed side facing up. 3 Close the disc compar tment. 4 Switch the OFF•FM•CD selector to CD. • To pause/resume play, press . • To stop play, press . Program tracks Note • You can program a maximum of 20 tracks. 1 In CD mode, when playback is stopped, press PROG. 2 Press / to select a track, and then press PROG to confirm. 3 Repeat steps 2 to program more tracks. 4 Press to play the programmed tracks. 5 To erase the program, press . Play control Repeat a track or all tracks. Play tracks randomly. PROG Program tracks. Stop play or erase a program. Star t or pause play. / Skip to a track or search within play. -VOLUME+ Adjust volume. Listen to radio Note • Position the antenna as far as possible from TV, VCR, or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. 1 Switch the OFF•FM•CD selector to FM. 2 Rotate TUNING slowly to tune to a radio station. EN 5 Listen to an external device You can listen to an external device through this device. 1 Switch the OFF•FM•CD control to FM or CDposition. 2 Connect the MP3 link cable (not supplied) to: • MP3-LINK jack (3.5 mm) on the unit • the headphone jack on an external device 3 Star t to play the device (see the device user manual). 6 EN 5 Specifications Amplifier Rated Output Power Frequency Response 2 X 1 W RMS 80 Hz - 16 kHz, ± 3 dB Signal to Noise Ratio MP3 Link Input 50 dB 0.5 V RMS 20 kohm Discs Laser Type Disc Diameter Suppor t Disc Semiconductor 12 cm/8 cm CD-DA, CD-R, CD-RW Audio DAC Total Harmonic Distor tion 24 Bits / 44.1 kHz <1% Frequency Response S/N Ratio 60 Hz -16 kHz 55 dBA Tuner Tuning Range Total Harmonic Distor tion FM: 87.5-108 MHz <3% Signal to Noise Ratio 40 dB General information AC power Operation Power Consumption Batteries Dimensions: Main Unit (W x H x D) Weight - With Packing - Main Unit 220-240 V...