Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Risk of product damage! When the remote control is not •• used for long periods, remove the batteries. For first-time use: 1 Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 Open the battery compartment. 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. ( 4 ) Connect power Warning Risk of product damage! Ensure that the power supply voltage •• corresponds to the voltage printed on the back or the underside of the apparatus. Risk of electric shock! When you disconnect the AC power, •• always pull the plug from the socket. Never pull the cord. Note Install the apparatus near the power supply socket and •• where the power plug can be easily reached. 1 Connect the AC power cord to the AC input jack on the apparatus and to the power supply socket. To switch the apparatus off completely, disconnect the • AC power cord from the power supply socket. ( 5 ) Note To save energy: after use, turn off the apparatus. •• Turn on 1 Press . The unit switches to the last selected source.»» 4 Play Play CD 1 Press SOURCE repeatedly to select the CD source. 2 Open the disc compartment. 3 Insert a disc with the printed side facing up, and then close the disc compartment. To pause/resume play, press • . To stop play, press • . For MP3/WMA files: to select an album, press • . To skip to a track, press • / . To search within a track, press and hold • / . Release to resume normal play. Play from USB devices Note Ensure that the USB device contains playable audio •• contents for supported formats. The USB terminal can be loaded with 700 mA.•• 1 Press SOURCE repeatedly to select the USB source. 2 Insert the USB connector on the device into the socket. 3 Press / unit to select a folder. 4 Press / to select a file. 5 Press to pause/resume play. 6 Press to stop play. Listen to an external device You can also listen to an external audio device through this unit. For an audio device with a headphone socket: 1 Press SOURCE repeatedly to select MP3 LINK source. 2 Connect the supplied MP3 LINK cable to the • MP3 LINK socket on this unit. the headphone socket on an MP3 player.• 3 Start to play the MP3 player. (See the user manual of the MP3 player.) 5 Adjust sound Adjust volume level During play, press - VOLUME + to decrease/increase the volume level. Enhance bass During play, turn on or off the DBB. If DBB is activated, DBB is displayed.»» Mute sound During play, press MUTE to mute or restore volume. 6 Play options Select play modes 1 Press MODE repeatedly to select a play mode: • [ ] (repeat) – repeat a track • [ ALB] (repeat album) – repeat an album • [ ALL] (repeat all) - repeat an entire CD/program • [ ] (shuffle) - play tracks randomly 2 To return to normal play, press MODE repeatedly until play mode icons are no longer displayed. Tip Shuffle play cannot be selected when you play programmed •• tracks. Program tracks You can program a maximum of 20 tracks. 1 In CD/USB mode, at the stop position, press PROG to activate the program mode. [PROG] (program) starts to blinks.»» 2 For MP3/WMA tracks, press ALBUM/PRESET +/- to select an album. 3 Press / to select a track number, and then press PROG to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. During play, [PROG] (program) is displayed.»» To erase the program, in the stop position, press • . Display play information During play, press DISPLAY repeatedly to select different play information. 7 Listen to the radio Tune to a radio station Note For optimal reception, fully extend and adjust the position of •• the FM antenna. 1 Press SOURCE repeatedly to select FM or MW. 2 Press and hold / for more than 2 seconds. The radio tunes to a station with strong reception »» automatically. 3 Repeat step 2 to tune to more stations. To tune to a weak station, press • / repeatedly until you find optimal reception. Program radio stations automatically Note You can program a maximum of 20 FM radio stations and 20 •• MW radio stations. In tuner mode, press and hold PROG for 2 seconds to activate automatic program mode. [AUTO] (auto) is displayed.»» All available stations are programmed in the order of »» waveband reception strength. The first programmed radio station is broadcast »» automatically. Program radio stations manually Note You can program a maximum of 20 FM radio stations and •• 20 MW radio stations. 1 Tune to a radio station. 2 Press PROG to activate program mode. [PROG] (program) blinks on the display.»» 3 Press to allocate a number (1 to 20 for FM and 1 to 20 for MW) to this radio station, then press PROG to confirm. The preset number and the frequency of the preset »» station are displayed. 4 Repeat the above steps to program other stations. Note To overwrite a programmed station, store another station in •• its place. Select a preset radio station In tuner mode, press to select a preset number. 8 Other features Set the sleep timer This unit ca...