Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
d). Centre positive. e). Dimension 4mm 2. Insert the DC plug, at the end of the AC/DC (6V) adaptor cord into the DC input jack, on the side of the unit. 3. Plug the AC/DC (6V) adaptor into a 120V, 60Hz AC power wall outlet socket. (Make sure the input of the AC/DC (6V) adaptor match with your local supply, if you have any problem, please consult with your dealer.) 2 3 6. HEADPHONE AND HI - FI CONNECTION TO Listening with the Headphones Connect the plug of the stereo headphones (included) into the PHONES (green) socket. CAUTION: Avoid excessive volume levels for a long period of time when using headphones, as this may impair your hearing. TO CD / AUX IMPUT Connecting to Component Audio Systems Connect the stereo connection cable (not included)) into the LINE OUT (black) socket of the unit and the CD / AUX inputs of an audio system. TO LINE OUT Note: Always switch the power off before making any connections between the player and another unit. 7. LOCATION OF CONTROLS Door Open Button Skip / Search Button Volume Control Knob Headphone Socket Line Out Socket Bass Boost Switch Program Button Display Lens Mode Button Stop Button Play / Pause Button ASP Button DC Input 8. BASIC DISC PLAY 1 11 1. Connect the headphones to the 3 PHONES (green) socket. 2. Press the OPEN button to open the 2 CD compartment lid. 3. Adjust the VOLUME to minimum. 4. Insert the disc with the label side 5 facing up. 5. Close the lid securely until a click is heard. 6. Press the PLAY button to start playing. 6 4 To enhance the bass effect Set the BASS BOOST switch to the ON position. Note: The bass boost performance will be dependent on the VOLUME control setting. Turning Power On and Off This unit has no ON / OFF switch. To turn on and off, press the following buttons. To turn on: Press PLAY / PAUSE (playback starts) To turn off: Press STOP button once for standby mode. Press STOP button again to turn off the power. Auto Power-Off Function When the unit is stopped (standby mode) for approximately 1 minute, the power is automatically turned off. Remove the disc Hold the edge and gently press the center pivot as illustrated, then pick up the disc. Caution: Wait for the disc to stop rotating before pressing the OPEN button. Note: This unit can play 3" (8cm) single CDs without an adaptor. Do not use a CD single adaptor for these discs. 9. LCD DISPLAY INFORMATION During STOP mode The total number of tracks and the total playing time of the disc are displayed. Total no. of tracks Total playing time During PLAY mode The track number and the elapsed playing time are displayed. This sixth track has elapsed 2 min. 30 sec. During PAUSE mode The track playback is paused, the elapsed time and track number is flashing. Note: When lid is opened during play mode ----- shows in the display indication the door is open. Note: A flashing indication appears in the upper right of the display when the batteries need to be changed. 10. REPEAT / PLAY MODES Every time the MODE button is pressed, the corresponding mode appears in the display window, in the following sequence: MODE MODE MODE MODE Push MODE button once and is shown in During play the LCD display, the current track on the disc x 1 press will be repeated. MODE Push the MODE button twice and is During playshown in the LCD display, all tracks on the disc will be repeated. x 2 press MODE Note: In normal mode none of the above symbols appear in the display. NORMAL PLAY To play the entire disc, press PLAY once. Press once to play x 1 press PLAY / PAUSE 11. Intro Scan and Programmed Track Play INTRO To listen to the first 10 seconds of each song on the disc use the INTRO feature. To initiate INTRO, press MODE button three times while the disc is playing. If you wish to start the disc in INTRO mode, press MODE button three times and then press During play x 3 press MODE PROGRAM This allows selected tracks on the disc to by played in any desired order. To set the program play Note: Programs can be set in the STOP mode. 1. Press the PROGRAM button when the unit is in the stop mode. The track number will appear in the display with the indicator flashing. 2. Press or to select the desired track. 3. Press the PROG button to enter the track into memory. 4. Repeat steps 2 and 3 to program up to 24 tracks into memory. During STOP mode x 1 press 5. Press to start the programmed play. PROG 6. To erase the program, press the STOP button twice. 12. RANDOM PLAY/SKIP AND SEARCH FUNCTIONS Track no. of the first desired selection The second selection RANDOM This enables all the tracks on a disc to be played in a random (RAND) sequence. For example: if RAND is selected while playing track 8, the random function will begin operating when track 8 has finished playing. When all the tracks on the disc have been played in the random mode, the CD player will automatically stop and power down in one minute to conserve battery life. During play x 4 press MODE To select RAND mode, push the MODE button four times during play. Pressing M...