Page 1 Page 2 1 3 5 6 7 13 1210 11 2 8 9 14 15 19 20 16 17 18 4 4A INTRODUCTION Congratulations on purchasing a Gemini CD-210 CD Player. This state of the art professional CD player is backed by a three year warranty, excluding lasers. One year warranty on CD lasers. Prior to use, we suggest that you carefully read all the instructions. CAUTIONS Do not use this CD Player at temperatures below 41°F/5°C or higher than 95°F/35°C. Place the unit in a clean and dry location. Do not place the unit in

Place the track in PAUSE mode. This will activate the stutter mode. Then use the JOG WHEEL (23) for fast, precise searching. SEE JOG WHEEL (23) for more info. Once you have found the point at which you would like to begin playing, do not further adjust the JOG WHEEL (23). Then press PLAY/PAUSE (8) rapidly. Then CUE (7) LED will blink. Your CUE is now stored into the unit's memory. Press CUE (7) to scan to the CUE point. This will pause the CD at the point of cue. Press and hold the CUE (7) but

If they are okay, check your amplifier or receiver. • If the CD skips, check the CD for dirt or scratches. Do not assume that the CD player is defective. Many CDs are recorded out of spec and will skip on most or all CD players. Before sending the unit in for repair, try playing a CD that you are sure plays properly. SPECIFICATIONS GENERAL: Type.................... Dual Mechanism Compact Disc Player w/wired remote Disc Type............................... Standard Compact discs (12 cm & 8 cm) Tim

Wenn kein CD oder AUX Eingang vorhanden ist, kann jeder Leitungseingang (nicht Phono) verwendet werden. FUNKTIONSBESCHREIBUNG NETZSCHALTER: Nachdem sichergestellt wurde, da.der Schieberegler VOLTAGE SELECTOR SLIDE SWITCH (3) auf der hinteren Schalttafel richtig eingestellt ist, die Einheit einstopseln und den Netzschalter POWER (2) einschalten. Damit wird die Einheit eingeschaltet. Wenn der Schalter POWER (2) ein zweites Mal gedruckt wird, wird es ausgeschaltet. CD-FACH: Im CD-Fach -DISC TRAY (1

Pressing the SINGLE (15) button a third time deactivates the CONTINUOUS function. TIME: The TIME (16) button switches the time display between the three available choices listed under DISPLAY. LOOP IN: Pressing the LOOP IN (17) button while a track is playing will set a loop point. LOOP OUT: After a loop point is memorized, pressing LOOP OUT (18) in play mode will repeat the section between the first loop point and a second loop point when the LOOP OUT (18) button was pressed. Press LOOP OUT

In play mode, pressing a CUE BUTTON will pause play and bring you to the CUE POINT when you can then press the play/pause button to play from the CUE POINT. SET CUE: Use the SET CUE (10) button to activate the DIRECT ACCESS BUTTONS to set a CUE POINT. See the CUE INSTRUCTIONS section for more information. DIRECT ACCESS BUTTONS: Use the DIRECT ACCESS BUTTONS (2) to select what track to play and to set a CUE POINT. See the CUE INSTRUCTIONS section for more information. SINGLE-AUTO CUE/CONTINUOUS:

CD-20Q professional dual deck CD player Professioneller Doppel-CD-Player Reproductor Doble de CD Profesional Double Lectuer CD Professionnel OPERATIONS MANUAL BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL D’INSTRUCTIONS MULTI LANGUAGE INSTRUCTIONS ENGLISH................................................................................................................................................................................................................................................

Listen to the track and when the track gets to the approximate spot, push the PLAY/PAUSE BUTTON (5) putting the unit into PAUSE MODE 2 Press the CUE BUTTON (9) and move the JOG WHEEL (10) to the point where you want the cue to start. NOTE: At this point, if you decide to keep a previous cue point, hit the CUE BUTTON (9) and then the PLAY/PAUSE BUTTON (5). Your previous cue will still be in memory. 3 Press the PLAY/PAUSE BUTTON (5) to memorize the cue point. 4 Repeat the process to set a new

It will operate at 115 or 230 volts. To set the proper voltage follow these steps: 1. Place the head of a screw driver in the center of the VOLTAGE SELECTOR SLIDE (3) found on the rear panel. 2. Slide the switch left for 115 volts or push the switch right for 230 volts. 3. Do not force or twist the switch. Excessive force may cause damage. If the switch does not move smoothly, contact a qualified technician. CONNECTIONS: 1. Plug one end of a set of RCA connectors into each of the LINE OUTPU

X _ Sj aU^> ► n n *? V, U-U-ucf S H3i _ Wli&n"7" 1 -f. in s * *_/ r; il ■ id. m 1*1 J||lll!ll| [c.ue) .(3 i i [««m LOU | = firT) (out) «ioop | lllllllllllllll + ^ i ■ S)J m i® ► n n y *>■ U.Umo- WrT"-,. j-i ; u r; tl ■ id CD CD CDX-2400 CDM-3600 GEN/1INIDJ.CDK/1 Professional CD Players CDX-1200 & CDX-2400 Our CDX Series CD Players include the CDX-1200 Professional 2U Single CD Player and the CDX-2400 Professional 2U Dual CD Player. Both models offer all the functionality of high