Évaluations - 28, GPA: 4.1
(
)
)
|
Facilité d'utilisation
Please take the time to read and understand this manual so you can begin to enjoy the convenience and features this product has to offer. The unit is a weather station device that has several weather related functions. The main features are: FEATURES Main Display Unit: • dual clock and dual alarm • calendar (month/day/date) • local temperature display • receives and displays temperature and humidity readings from up to 3 remote transmitters via RF technology of 433MHz • minimum and maximum temperature and humidity memory • temperature and humidity trend indicator • temperature history (bar graph for past 12 hours) • weather icons • user-selectable C or F • table stand or wall mountable • battery type: 2 x AA Remote Transmitter • drip-proof design with LCD • socket of external sensor probe • temperature display in user-selectable °C or °F • humidity display • transmission range: up to 40 meters in open area • battery type: 2 x AA size 2 3 53 6.qxd 30.08.2004 14:48 Page 3 ENGLISH Button placement GETTING STARTED 1. MIN/-/MIN: shows minimum temperature & humidity; adjusts clock, alarm, date and temperature alarm values 2. ON/OFF: toggles between °C and °F, 12 and 24 hour format, Alarm 1 & 2 on and off, and bar graph indoor and outdoor selection; scrolls through temperature alarm settings (off/high/low) 3. CHN: scrolls through remote channels (1 to 3); adjusts time and date values 4. HOUR/+/MAX: shows maximum temperature & humidity; adjusts clock, alarm, date and temperature alarm values 5. SNOOZE/MODE: scrolls through Clock 1 & 2, Alarm 1 & 2, Date and Temperature Alarm mode; snooze for alarm 6. LCD display 7. SET: enter to House code and Channel setting mode 8. C/F change between °C or °F, change channel and house code 9. Battery compartment 10. Socket for external sensor probe. 3536.qxd 30.08.2004 14:48 Page 4 ENGLISH SETTING UP Set up the transmitter(s) before setting up the receiver 1. Remove battery cover and insert batteries to start setup AA size batteries (included) Insert batteries into compartment observing proper polarity 2. HOUSE CODE will flash for 8 seconds 3. Select HOUSE CODE (1-15) by pressing C/F and pressing SET to CHANNEL setting If you have multiple transmitters for a single receiver, set each transmitter to the same House code 4. CHANNEL will flash for 8 seconds 5. Select CHANNEL(1-3) by pressing C/F If you have multiple transmitters for a single receiver, set each transmitter to a different Channel code 6. Humidity & Temperature will alternatively display on LCD screen 7. Select °C or °F of Temperature by pressing C/F Setting up transmitter(s) (2) (6) Itr 0/ h 50* 1 n:, -e- Use a different house code if your weather station detects other signals from neighboring sources Factory default: house code = 01 and channel = 01 1. Remove battery cover 2.2 AA size batteries (included) 3. Insert batteries into compartment, observing proper polarity; replace cover LOW BATTERY INDICATION: Receiver: Low battery indicator will display continuously when batteries need replacing. On transmitter, S will be displayed Setting up receiver 4 3536.qxd 30.08.2004 14:48 Page 5 ENGLISH WIRELESS TRANSMISSION Automatic Learn Function: The learn function starts automatically and runs for approximately 3 minutes when batteries are first installed in the receiver. Within these 3 minutes, the receiver will pick up the temperature and humidity signals from the remote transmitter and display the reading. r l.lïr :==-...... ,?3S m _r>. JlÈj ===f===T=====^ ^ It I—(.2)--- 2 k V -e- Manual Learn Function (Remote Signal Search): If a new remote transmitter is added or if signal is lost (outdoor read out on the receiver is blinking), the learn function must be executed again. -e- 1. Press and hold CHN for 3 seconds to start. 2. Unit will beep to indicate that learn function has started. 3. Channel symbol will blink and unit will continue to beep as each remote transmitter is detected. 4. Within 3 minutes, the temperature and humidity reading of the remote transmitter will display on the receiver. JYo~ !1 VA 2 (3)~ ■as»] — O - OUT Wp ,_37 tj) -38É 5 3536.qxd 30.08.2004 14:48 Page 6 ENGLISH WIRELESS TRANSMISSION Environmental factors and signals from other household devices, such as remote entry controls, security systems, and computers, may interfere with the wireless transmission of this product and cause temporary reception loss. This is normal and does not affect the general performance of this product. Stable reception will resume once the interference ends. For optimal performance: • Place the receiver and remote transmitter side by side about 1 metre apart, and allow the receiver and remote transmitter to synchronize for 10 minutes before you place the remote transmitter outdoors. • The remote transmitter should be placed in a dry shaded area. NOTE: Fog andmist will not harm the remote transmitter but direct rain must be avoid...