Évaluations - 11, GPA: 3.4
(
)
)
|
Facilité d'utilisation
Follow all warnings and operating recommendations in this manual. Keep this manual for future reference. CAUTION Risk of electric shock DO NOT OPEN Warning: To prevent fire or shock hazard do not expose the appliance to rain or moisture. To prevent shock hazard do not remove the cover yourself. Apply to a service centre for repair and maintenance. This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the appliance. PRECAUTIONS • Check, whether the electricity supply in your home sockets corresponds to the voltage specified on the housing of the unit. • To prevent fire or shock hazard do not expose the appliance to rain or moisture. • To prevent fire or shock hazard do not use this unit near water for example, near a bath tub, wash bowl, kitchen sink or 3 laundry tub, in a wet basement, or near a swimming pool and such like places. Prevent the unit from dripping and splashing. • Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. • Place the unit in a way that you could easily pull out the plug from the socket if there are some damages. 6601 IM.indd 3 12:33:4 ENGLISH • For additional protection during lighting and in cases when you are not going to use the unit for a long time, unplug the unit. It will prevent the unit from failure during lighting and power surges. • To unplug the unit, hold it by the plug. Do not pull by the cord. • In order to avoid electric shock do not remove the cover yourself. Do not repair and do not modify the unit. Technical maintenance must be performed only by qualified service personnel. • Install the unit in places with proper ventilation. Do not block the ventilation openings of the unit. • Do not connect the FM-anten-na with the external antenna. • The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that produce heat. Do not expose the unit to direct sunlight, excessive dust or mechanical shocks. Do not place the unit near sources of open fire, such as candles. DESCRIPTION 1 - The AL. OFF button 2 - The TIME setting button 4 3 - The ALARM on button 4 - The SNOOZE button 5 - The HOUR setting button 6 - The MIN setting button 7 - The SLEEP button 8 - The VOLUME control/ BUZZ button 9 - The TUNING knob 10 - Display 11 - The AUTO indication 12 - Battery compartment 13 - The AUTO/ON/OFF switch 14 - The FM/AM switch 15 - The FM-antenna cord OPEARTING INSTRUCTIONS Inserting batteries • Open the battery compartment lid and insert a 9 V battery, following the polarity. • Close the battery compartment lid. Note: The unit is intended for operation from the mains, battery operation is a reserve variant. Batteries help to store the settings while switching off, or absence of power. Remove the battery if you are not going to use the unit for a long time. Before connecting the unit, make sure, that the electricity IM.indd 4 18.03.2009 12:33:46 ENGLISH supply in your home sockets corresponds to the voltage specified on the housing of the unit. Insert the plug into the socket. Listening to the radio 1. Set the AUTO/ON/OFF switch to the ON position. 2. Select the required range, by setting the FM/AM switch to the FM or AM position. 3. Rotate the TUNING knob to tune to the desired radio station. 4. Use the VOLUME knob to set the required volume level. 5. After you finish listening to the radio, set the AUTO/ON/OFF switch to the OFF position. Setting the alarm on-time 1. Press and hold the ALARM button. Press the HOUR button to set hours, the MIN button -minutes. 2. If you want to use radio as the alarm signals, set the required volume level by using the volume knob that is set the VOLUME knob to the BUZZ position. 3. Set the AUTO/OFF/ON switch to the AUTO position. 4. When the time is reached the alarm will switch on. Press the AL OFF button to switch off the alarm, the next day the alarm will switch on at the preset time again. To switch the alarm off set the AUTO/OFF/ON switch to the OFF position. Note: For better receipt of FM stations we recommend full unwinding of the FM-antenna cord and its optimal location. Setting the current time 1. While connecting of the unit the “0:00” indication will appear on the display. 2. Press and hold the TIME button. Press the HOUR button to set hours, the MIN button -minutes. Alarm snooze You can switch off the alarm signal for 9 minutes by pressing of the SNOOZE button. In 9 minutes the alarm signal will be repeated. Auto switching off of the radio You can set the time ...