Évaluations - 2, GPA: 4.5
(
)
)
|
Facilité d'utilisation
All of the illustrations in this manual show Module 3358. • Button operations are indicated using the letters shown in the illustration. • All of the displays in this manual show black-on-white. • For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. Module 3358 Module 3368 Module 3798 • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. Press . Timekeeping Mode World Time Mode Countdown Timer Mode Stopwatch Mode Alarm Mode Hand Setting Mode General Guide • Press C to change from mode to mode. • In any mode (except when a setting screen is on the display), press B to illuminate the display. Timekeeping This watch features separate digital and analog timekeeping. The procedures for setting the digital time and analog time are different. • In the Timekeeping Mode, you can press D to change the display format as shown below. Day of week Seconds Month – Day Hour : Minutes Press . PM indicator Day of the Week Month – Day Hour : Minutes Digital Time and Date Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you can also configure settings for summer time (Daylight Saving Time or DST), your Home City code (the code for the city where you normally use the watch), the 12/24-hour format, and the illumination duration. • This watch is preset with a number of city codes, each of which represents the time zone where that city is located. When setting the digital time, it is important that you select the correct city code for your Home City. If your location is not included in the preset city codes, select the preset city code that is in the same time zone as your location. • Note that all of the times for the World Time Mode city codes are displayed in accordance with the digital time and date settings you configure in the Timekeeping Mode. • After you correctly set your Home City time and date, you can set the watch up for timekeeping with a different city code simply by changing the Home City code in the Timekeeping Mode. To set the digital time and date 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C twice to move the flashing to the Home City code setting (see the illustration below), and then use B and D to select the code you want. • Make sure you select your Home City code before changing any other setting. • For full information on city codes, see the “City Code Table”. 3. Press C to move the flashing in the sequence shown below to select the other settings. Seconds DST Home City Code Hour Minutes Illumination Duration Day Month Year 12/24-Hour Format Screen To do this: Reset the seconds to 00 Toggle between Daylight Saving Time (ON) and Standard Time (OF) Change the Home City code Change the hour or minutes Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Change the year Change the month or day Select three seconds or one second as the illumination duration Do this: Press D. Press D. Use D (east) and B (west). Use D (+) and B (–). Press D. Use D (+) and B (–). Press D. 4. When the setting you want to change is flashing, use B and D to change it as described below. 5. Press A to exit the setting screen. • Resetting the seconds only (without changing the DST, Home City code, hour, or minute setting) causes the analog minute hand setting to be adjusted to match the seconds count automatically. If you change any of the other settings, you will have to adjust the hand setting manually. • See “Digital Time Daylight Saving Time (DST) Setting” below for details about the DST setting. • The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes. • For details about illumination duration, see “Illumination”. Digital Time Daylight Saving Time (DST) Setting Daylight Saving Time (summer time) advances the digital time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To toggle the Timekeeping Mode digital time between DST and Standard Time 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C once to display the DST setting screen. 3. Press D to toggle between Daylight Saving Time (ON displayed) and Standard Time (OF displayed). 4. Press A to exit the setting screen. • The DST indicator appears on the Timekeeping, Alarm, and Hand Setting Mode to indicate that Daylight Saving Time is turned on. Module 3358 Module 3368 Module 3798 DST indicator 2 Operation Guide 3358/3368/3798 Setting the Analog Time Perform the procedure below when the time indicated by the analog hands does not match the time of the digital display. To adjust the analog time 1. In the Timekeeping Mode, press C five times to enter the Hand Setting Mo...
Ce manuel est également adapté pour les modèles :Montres - 3368 (921.36 kb)
Montres - 3798 (921.36 kb)