Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
(P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 20 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off . • Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode digital time. • To stop the alarm tone after it starts to sound, press any button. • Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen Displaying the SNZ setting screen To test the alarm In the Alarm Mode, hold down D to sound the alarm. To turn an alarm on and off 1. In the Alarm Mode, use D to select an alarm. 2. Press A to toggle it on (ON displayed) and off (OF displayed). • Turning on a one-time alarm (AL1through AL4) displays the alarm on indicator on its Alarm Mode screen. • Turning on the snooze alarm (SNZ) displays the alarm on indicator and snooze alarm indicator on the Alarm Mode snooze alarm screen, and in all other modes. • In all modes (except for the Alarm Mode), the alarm on indicator is shown for any alarm that is currently turned on. • The alarm on indicator flashes while the alarm is sounding. • The snooze alarm indicator flashes during the 5-minute intervals between alarms. Warning! • Always make sure you are in a safe place whenever you are reading the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not surprise or distract others around you. • When you are wearing the watch, make sure that its auto light switch is turned off before riding on a bicycle or operating a motorcycle or any other motor vehicle. Sudden and unintended operation of the auto light switch can create a distraction, which can result in a traffic accident and serious personal injury. To turn the auto light switch on and off In any mode, hold down B for about two seconds to toggle the auto light switch on (auto light switch indicator displayed) or off (auto light switch indicator not displayed). • The auto light switch indicator is on the display in all modes while the auto light switch is turned on. • In order to protect against running down the battery, the auto light switch automatically turns off approximately six hours after you turn it on. 4 Operation Guide 3319/3781 Scrolling The B and D buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed. Initial Screens When you enter the World Time or Alarm Mode, the data you were viewing when you last exited the mode appears first. Timekeeping •Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes. •With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m. •With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. •The year can be set in the range of 2000 to 2039. •The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s batteries replaced. World Time •The World Time Mode times are calculated from the current Home City time setting in the Timekeeping Mode, using the Greenwich Mean Time (GMT) differentials associated with each city code. •The GMT differential is a value that indicates the time difference between Greenwich Mean Time and the time zone where a city is located. •GMT differential is calculated by this watch based on Universal Time Coordinated (UTC) data. Illumination Precautions •The electro-luminescent panel that provides illumination loses power after very long use. •Display illumination may be hard to see when viewed under direct sunlight. •The watch may emit an audible sound whenever the display is illuminated. This is due to vibration of the EL panel used for illumination, and does not indicate malfunction. •Illumination automatically turns off whenever an alarm sounds. •Frequent use of the light shortens the battery life. Auto light switch precautions •Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light switch to operate when it is not needed, which shortens battery life. If you want to wear the watch on the inside of your wrist, turn off the auto light switch feature. •Illumination may not turn on if the face of the watch is mo...
Ce manuel est également adapté pour les modèles :Montres - 3781 (816.02 kb)