Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
Check system before each use for stability. DO NOT use system during windy and/or severe weather conditions, system may tip over. Place system in the storage position and/or in an area protected from the wind and free from personal property and/or overhead power lines. During play, use extreme caution to keep player's face away from the backboard, rim or net. Serious injury could occur if teeth/face come in contact with backboard, rim or net. When adjusting height or moving unit, keep hands and fingers away from moving parts. Do not allow children to adjust system. During play, do not wear jewelry (rings, watches, necklaces, etc.) Objects may entangle in net. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 211239 1/98 5 01/04 P/N 21199203 PARTS LIST & HARDWARE IDENTIFIER Item Qty. Part No. Description 1 1 206740 Tank (White) 2 1 200628 Wheel Axle 3 2 226401 Wheel 4 1 908121 Bottom Pole Section 5 1 202820 Rod, 3/8 O.D. x 4-3/4 Long 6 1 202822 Eye Bolt, 3/8-16 x 3-3/4 Long 7 1 200627 Wheel Bracket 8 5 203063 Lock Nut, Nylon Insert, 3/8-16 9 1 201625 Bolt, Hex Head, Yellow Dichromate, 5/16-18 x 3.60" Long 10 6* 203218 Washer, 5/16 Flat 11 2 986206 Tank Strut 12 1 203220 Lock Nut, 5/16-18 13 1 201261 Label, Moving System 14 2 203156 Bolt, Hex Head, 5/16-18 x 1 Long 15 10 203100 Nut, Hex Flange 5/16-18 16 1 Rim 17 12 201219 Smart Clip 18 1 902006 Extension Arm, White 19 12* 203309 Washer, 1 O.D. 20 4 203113 Bolt, Hex Flange, 5/16-18 x 2-1/2 Long 21 2 203038 Bolt, Carriage 5/16-18 x 2-3/4 22 2 201562 U-bolt, Round, 3/8-16 x 2-3/4 Long 23 1 Net 24 1 201190 Cap 25 1 203124 Tie Down Stake 26 2 201651 Spacer, Wheel Axle 27 1 201568 T-Strap 28 1 201189 Tank Cap 29 2 906706 Strut, Backboard 30 1 201546 U-bolt, Square, 5/16-18 x 3 3/4 Long 31 1 203297 Strap, U-bolt 32 6* 200516 Bolt Covers, Black Vinyl * You may have extra parts with this model. Item #8 (5) Item #15 (10) Item #12 (1) Item #19 (12)* Item #10 (6)* Item #32 (6)* Item #17 (12) Item #26 (2) Item #21 (2) Item #5 (1) Item #14 (2)Item #6 (1) Item #9 (1) Item #20 (4) 6 P/N 21199203 01/04 SECTION A: ASSEMBLE THE BASE This is what your system will look like when you’ve finished this section: TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) 9/16” and 1/2” 9/16” and 1/2” AND/OR Item #5 Item #6 Item #12Item #10 Item #8 Item #14 Item #15 Item #9 Item #26 Item #32 7 01/04 P/N 21199203 1. 1Remove contents from tank 2. 6 5 Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 4 5 4 6 8 P/N 21199203 01/04 8 4 5 6 3. 2 26 26 3 3 7 Install wheel axle (2) through wheel carriage (7) and install wheels (3) onto wheel axle (2) with spacers (26) as shown.Insert pole assembly into tank assembly as shown. Secure bottom pole (4) to tank and wheel bracket as shown, a deep socket is recommended. IMPORTANT! DO NOT OVER TIGHTEN. TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! THE SPACER (26) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE. IMPORTANT!: 8 4 5 6 3. 2 26 26 3 3 7 Install wheel axle (2) through wheel carriage (7) and install wheels (3) onto wheel axle (2) with spacers (26) as shown.Insert pole assembly into tank assembly as shown. Secure bottom pole (4) to tank and wheel bracket as shown, a deep socket is recommended. IMPORTANT! DO NOT OVER TIGHTEN. TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! THE SPACER (26) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE. IMPORTANT!: 9 11 1 12 11 10 10 4. Secure tank struts (11) to pole. Rotate non-secured ends of tank struts (11) outward to mounting holes in tank as shown. TIGHTEN BOLT (9) IN LOCK NUT (12) UNTIL FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE. WARNING! 9 01/04 P/N 21199203 5. 11 11 1 11 15 10 10 14 Secure non-secured ends of tank struts (11) to tank as shown. Repeat for opposite side. 11 11 1 11 15 10 10 14 Secure non-secured ends of tank struts (11) to tank as shown. Repeat for opposite side. 1824 22 8 19 6. Attach extension arm (18) to pole using U-bolt (22), washers (19), nuts (8), as shown. Install pole cap (24) as shown. DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY, IT MAY TIP OVER WARNING! 29 31 30 15 7. 32 Attach board struts (29) to extension arm using U-bolt (30), strap (31), and nuts (15) and bolt covers (32) as shown. Tighten completely. 10 P/N 21199203 01/04 SECTION B: ASSEMBLE THE BACKBOARD & RIM This is what your system will look like when you’ve finished this section: TOOLS REQUIRED FOR THIS SECTION HARDWARE USED IN THIS SECTION (not actual size) 1/2” 1/2” AND/OR Item #17 Item #15 Item #19 (12) Item #20 Item #21 Item #32 11 01/04 P/N 21199203 P/N 21199203 01/04 12 21 15 29 15 19 20 19 16 Refer To Instructions Included With Rim Hardware For Rim Assembly. 32 1. Install backboard and rim as shown. Note: See special rim instructions if included. 2. Install clips...