Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease vehicle running time. • After the first charge, recharge the battery for at least 14 hours after each use. Never charge the battery longer than 30 hours. Charge the battery after each use, regardless of how long the vehicle was used. • The battery must be upright while charging. • Do not allow the battery to run down completely before charging. • Charge the battery befor

Adult assembly is required. Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included). Requires three "AA" batteries (included). Age: 2-6 years. Weight limit: 60 lbs (27 kg). sher-price.com Consumer Information #8 x 3" (7,6 cm) Screw – 1 #8 x 3/4" (1,9 cm) Screw – 4 Cap Nut – 1 FASTENERS SHOW ACTUAL SIZE WARNING TO AVOID SERIOUS INJURY: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hi

• Fit a front axle cover on the front axle on one fork arm. • Insert two 5/8" screws through the front axle cover and into the fork. Tighten the screws with a Phillips screwdriver. Do not over-tighten. • Repeat this procedure to attach the front axle cover to the other side of the front wheel assembly. Groove Front Axle Cover Groove Pointed End 5 Pedal Assembly Front Axle Fender Fork Fork Arm Front Axle Front Wheel Assembly • Snap the frame cover (wider side facing forward) on the underside of t

Tools needed for assembly: Hammer, Phillips Screwdriver, Scrap Block of Wood. If you have any questions about this product, or are missing a part, please call Fisher-Price® toll-free at 1-800-432-KIDS, rather than return this product to the store. Age: 2-5 years. Weight Limit: 55 lbs. • Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider.

Hint: Assembling the track is not a one-time assembly. The track has been designed for easy disassembly for storage (see Storage and Care section). Tab 4 Slot Tab Slot Symbols Track Layout and Assembly o cho o o o c h oo choo o chugga chug chug chug c h ugga ch ug chug chug • 74878b-0920.qrk 6/19/01 10:48 AM Page 4 Tunnel Top, Hooked Tabs, Slots, Tunnel 4 • Apply the label to the tunnel, as indicated in the illustration. • Insert and “snap” the four hooked tabs on the tunnel top into the four sl

• Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pools or other bodies of water. • Always wear shoes. • Never allow more than one rider. 2 Parts Not Shown: Label Sheet and Cap Nut Assembly Tool Seat Frame Pedal 2 Fork Covers Front Wheel Pedal Axle Fork Headlight Cover Seat Retainer Cap Straight Axle 2 Rear Wheels Handlebar 2 Hubcaps 2 Covers 4 Pedal Hubs #6 x ." Screw – 2 • Please save all packaging material until assembly i

23/1616 ” Washer Front Bushing Front Axle 2 • Turn the frame on its side. • Fit the sounds and lights box onto the dash on the topside of the vehicle. • Then, fit the retainer over the battery compartment door on the underside of the frame. Insert four #8 x 3/4” screws into the retainer and tighten. • Turn the frame upright. 3Wheel Hubcap Front Axle • Slide a wheel, smooth side first, onto the front axle. • Then, slide a hubcap, post side first, onto the front axle and into the wheel. 4Cap Nut W

• Listen to the order Shrek wants the ogres to line up in - smallest to largest, tallest to shortest, by the numbers on their shields, etc. • Use the joystick to scroll through the ogres. Then, press a red handlebar button to select the ogre. 7 joystick again to select a place in line. Then, press a red handlebar button to move the ogre into line. • Repeat this procedure to line up all of the ogres. • When you’re fi nished with this activity, press the exit button to return to the road. Pedal to

PHYSICAL LEARNING ARCADE SYSTEM Requires four “D” (LR20) alkaline batteries (not included) for operation. Age: 3-6 years This product is intended for indoor use only. Use ONLY alkaline batteries for longest battery life. sher-price.com Get up. Get smart. Get going! Get up. Get smart. Get going! It’s a stationary bike, a learning center, and an arcade game system – all rolled into one! Smart Cycle® plugs right into your TV, ready to take kids on learning adventures like no other. As they pedal, f

• Slide a rear wheel, rounded side fi rst, onto the end of the rear axle. • Slide a rear wheel hub, pointed end first, onto the end of the rear axle. Rear Wheel (Flat Side First) Rear Axle Rear Wheel Hub (Pointed End First) Rear Axle Assembly Frame 2Bottom View • Turn the frame upside down. • Insert the rear axle assembly through the holes in the rear of the frame. .354" 4 • Fit a cap nut on the end of the rear axle. • Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap