Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
1 Press SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M” or “AREA” appears on the display. 2 If “AREA” does not appear, press T or S until it appears. 3 Press +. “AREA EU” appears and the channel intervals are set to 9 kHz for AM and 50 kHz (for manual tuning) / 100 kHz (for searching) for FM. To reset to the factory setting, follow the above step 1 and 2, then press – in step 3 (“AREA US” appears on the display.) AREA EU: Select this when used in an area other than North and South America. AREA US: Select this when used in North or South America. 8 TAPE OPERATIONS Listening to a tape 23 1 /I/ATT Turn on the power. Insert a cassette. When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse) Select the tape direction. • Press the both buttons at the same time. Each time you press the button, the tape direction changes PROG alternatively – forward ( ) and reverse ( ). To stop play and eject the cassette Press 0. Tape play stops and the cassette ejects from the cassette compartment. You can hear the last received station. • You can also eject the cassette with the unit turnd off. To fast-wind a tape Press either Aor 1. The tape will be wound in the direction of the arrows (Aor 1). Tape direction To restart playback, press Aor 1 lightly. ENGLISH 9 ENGLISH ENGLISH SOUND ADJUSTMENTS Turning on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels. Each time you press LOUD, the loudness function turns on/off alternatively. Selecting preset sound modes LOUD |\ You can select a preset sound adjustment suitable to the music genre. Each time you press SOUND, the sound mode changes as follows. SOUND Indication For: Preset values Bass Treble Loudness SCM OFF (Flat sound) 00 00 On BEAT Rock or disco music +2 00 On POP Light music +4 +1 Off SOFT Quiet background music +1 –3 Off Notes: • You can adjust the preset sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 12. • To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound” on page 11. • When one of the sound modes is selected, it is shown on the display as follows: For example, when “POP” is selected. 10 Adjusting the sound You can adjust the treble/bass sound and the speaker balance. 21 1 Select the item you want to adjust. Indication To do: Range BAS (bass) Adjust the bass –6 (min.) — +6 (max.) TRE (treble) Adjust the treble –6 (min.) — +6 (max.) FAD (Fader)* Adjust the front and rear speaker balance R6 (rear only) — F6 (front only) BAL (Balance) Adjust the left and right speaker balance L6 (left only) — R6 (right only) VOL (Volume) Adjust the volume 00 (min.) — 50 (max.) Note: * If you are using a two-speaker system, set the fader level to “00”. 2 Adjust the level. Note: Normally the + and – buttons work as the volume control buttons. So you do not have to select “VOL” to adjust the volume level. ENGLISH 11 ENGLISHENGLISH Storing your own sound adjustments You can adjust the sound modes (BEAT, POP, SOFT: see page 10) to your preference and store your own adjustments in memory. 3 22 1,4 1 Call up the sound mode you want to adjust. See page 10 for details. 2 To adjust the bass or treble sound level Select “BAS” or “TRE.” To turn on or off the loudness function Each time you press LOUD, the loudness function turns on and off alternatively. (= go to step 4) 3 Adjust the bass or treble level. See page 11 for details. 4 Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display. Within 5 seconds Within 5 seconds Within 5 seconds SOUND LOUD SOUND Your setting is stored in memory. 5 Repeat the same procedure to store other settings. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 10. 12 OTHER MAIN FUNCTIONS Setting the clock 2,3 12,3 4 Press and hold the button for more than 2 seconds. “CLOCK H,” “CLOCK M” or “AREA” appears on the display. 2 Set the hour. 1. Select “CLOCK H” if not shown on the display. 1. 2. 2. Adjust the hour. 3 1. Set the minute. 1. Select “CLOCK M.” 2. 2. Adjust the minute. Start the clock. To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. ENGLISH During tuner operation: ClockFrequency During tape operation: ClockPlay mode ClockElapsed playing time During CD operation: 13 ENGLISHENGLISH Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. How to detach the control How to attach the control panel panel ...
Ce manuel est également adapté pour les modèles :Dictation - KS-FX12 (695.5 kb)