Log:
Évaluations - 0, GPA: 0 ( )

Instructions Olympus, Modèle DP-211

Fabricant : Olympus
Taille : 2.19 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :
Dictation - DP-211 (2.19 mb)es
Dictation - DP-211 (2.21 mb)ru

Facilité d'utilisation


Delete unnecessary files to free up some space in memory. • When the available recording time becomes less than 60 seconds, the recording indicator starts flashing. The indicator flashes faster if the available time decreases to 30 seconds and to 10 seconds. Recording indicator lights while recording. a Current date/ b Recording mode indicator/ c Microphone sensitivity indicator/ d Total number of recorded files for the date/ e Current file number/ f Elapsed recording time/ g Remaining recording time • Be sure to remove the protective film on the display before using this product. To turn off the power: While the recorder is in the stop mode, slide the POWER switch to OFF/HOLD. Power save mode: If no operations are performed for more than 10 minutes when the power is on, the display automatically turns off and the recorder enters the power save mode. To exit the power save mode, press any button. HOLD: If sliding the POWER swich to OFF/HOLD while the recorder is in operation, all buttons and switches are disabled without interrupting the current operations. • The [Set Time & Date] screen appears when you use the recorder for the first time or when the recorder is turned on after more than 30 minutes without power supply. • If the time and date are not set, the time and date of the default settings are recorded to files . Turn on the power. Slide the POWER switch to ON. Protective film 4 Playback ``` a b c d e e Approximate file length When an earphone is connected, the speaker is turned off. Playback sound for an earphone is monaural. Volume To avoid irritation to the ear, turn down the volume before inserting an earphone. Do not raise the volume too high when using an earphone. It may cause hearing impairment and a decrease in hearing ability. High Low Noise cancel • When the NOISE CANCEL switch is set to ON, playback speed returns to normal. • An earphone is not supplied with this product. Fast Playback speed is changed between 0.5x, 0.75x, normal, 1.2x, 1.5x, and 2.0x by each press of the buttons. Slow On Noise is reduced when played back to achieve better sound quality. Off The file is played back as it was recorded. Noise Cancel indicator Changing the playback speed a Recording date/ b Current file number/c Elapsed playback time/ d Playback position bar indicator s To fast-forward or rewind a file, press and hold 0 or 9 button while playing back a file. s To skip to the next file or previous file, press 0 or 9 button. s Fast-forwarding or rewinding continues to the next file. `` `` `` Erase ```````` File search sWhen searching for a file recorded on October 15. When the recorder is in stop mode, press and hold the STOP (..) button to display the [Time & Date] and [Remain]. The date display appears. Select October 15. The first file is played back. If the file is skipped, the recorder plays back the next file. Recorder status indicator ..: During playback ..F : During fast playback ..S : During slow playback • An erased file cannot be restored. Double-check the file before deleting it. • If no operations are performed for 8 seconds, the recorder returns to the stop mode. • It may take for more than 10 seconds to complete the processing. Do not remove batteries while processing. The data may be corrupted. Check the battery level beforehand to ensure that that the batteries do not run out while processing. Erase in Date File Erase Cancel If [Cancel] is selected and the PLAY/OK (..) button is pressed, the recorder returns to the stop mode. To delete all files recorded on a specific date, press the SEARCH/ MENU button to switch to the date display. Select Set sSelect the file you want to delete and stop playback beforehand. Search for files by the date they were recorded. `````` Erase ```````` File search sWhen searching for a file recorded on October 15. When the recorder is in stop mode, press and hold the STOP (..) button to display the [Time & Date] and [Remain]. The date display appears. Select October 15. The first file is played back. If the file is skipped, the recorder plays back the next file. Recorder status indicator ..: During playback ..F : During fast playback ..S : During slow playback • An erased file cannot be restored. Double-check the file before deleting it. • If no operations are performed for 8 seconds, the recorder returns to the stop mode. • It may take for more than 10 seconds to complete the processing. Do not remove batteries while processing. The data may be corrupted. Check the battery level beforehand to ensure that that the batteries do not run out while processing. Erase in Date File Erase Cancel If [Cancel] is selected and the PLAY/OK (..) button is pressed, the recorder returns to the stop mode. To delete all files recorded on a specific date, press the SEARCH/ MENU button to switch to the date display. Select Set sSelect the file you want to delete and stop playback beforehand. Search for files by the date they were recorded. Menu settings Changingthe display language • E...

Ce manuel est également adapté pour les modèles :
Dictation - DP‑211 (2.19 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories