Évaluations - 2, GPA: 4
(
)
)
|
Photos et spécifications Sony ICD-P530F |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Uninstallation does not remove the message files. Connecting the IC recorder to your computer You can transfer the IC recorder data onto your computer by connecting the IC recorder to the computer. Use the USB connecting cable supplied with the IC recorder to connect the USB connectors of the IC recorder and your computer. The IC recorder is recognized by the computer as soon as the cable is connected. You can connect or disconnect the cable when the IC recorder and the computer are turned on or off. To USB connector of IC recorder To USB connector of your computer Connecting cable (supplied) Notes Be sure to install the Digital Voice Editor software before connecting the IC recorder to your computer. Otherwise, a message like [Found New Hardware Wizard] may appear when you connect the IC recorder to your computer. In this case, click [Cancel]. Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed. Use of this IC recorder with a USB hub or a USB extension cable is not guaranteed. A malfunction may occur depending on the USB devices connected at any one time. Before connecting the IC recorder to the computer, check that batteries are inserted in the IC recorder. When you connect the IC recorder to the computer, make sure that the IC recorder is in the stop mode. It is recommend that you disconnect the cable from the computer when you do not use the Digital Voice Editor. Referring to the help files For details on each operation, refer to the help files. Help Troubleshooting 51GB Troubleshooting Troubleshooting Before taking the unit for repair, check the following sections. Should any problem persist after you have made these checks, consult your nearest Sony dealer. IC recorder Symptom Remedy The unit does not operate. The batteries have been inserted with incorrect polarity (page 9). The batteries are weak. The buttons are locked with the HOLD switch (page 7). (If you press any button, “HOLD” will flash three times.) No sound comes from the speaker. The ear receiver or headphones are plugged in. The volume is turned down completely. “FULL” is displayed and you cannot start recording. The memory is full. Erase some of the messages (page 30). 99 messages have been recorded in the selected folder. Select another folder or erase some of the messages (page 30). Noise is heard. An object, such as your finger, etc., accidentally rubbed or scratched the unit during recording so that noise was recorded. The unit was placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. Plug of the connected microphone was dirty when recording. Clean the plug. Ear receiver/headphones plug is dirty. Clean the plug. Recording level is low. Set the microphone sensitivity to “H (high)” using the menu (page 18). Recording is interrupted. The advanced VOR function is activated. Set VOR to “OFF” (page 17). 52GB Symptom Remedy Recording level is unstable (when recording music, etc.). This unit is designed to automatically adjust the recording level when recording meetings, etc., and is not suitable for music recording. “--Y--M--D” or “--:--” is displayed. You have not set the clock (page 11). “--Y--M--D” or “--:--” is displayed on the REC DATE display. The date and time of recording will not be displayed if you recorded the message when the clock was not set. You cannot divide a message. You cannot divide a message in a folder which has 99 messages (page 32). If you divide messages frequently, the unit may become unable to divide a message. You cannot divide a message in the first or the last 1 second of a message. You cannot record messages up to the maximum recording time. If you record messages in a mixture of HQ, SP and LP modes, the recordable time varies from the maximum HQ mode recording time to the maximum LP mode recording time (page 15). No more recording can be made when 99 messages each have been recorded in a folder. Due to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. Symptom Remedy The remaining time displayed in the display window is shorter than that displayed in the supplied Digital Voice Editor software. The unit requires a certain amount of memory for system operation. That amount is subtracted from the remaining time, which is the reason for the difference. The audio is weak or has poor quality when listening to the radio. The batteries are weak. Replace all the batteries with new ones (page 9). Move the unit away from the TV. The picture of your TV becomes unstable. If you are listening to an FM program near the TV with an indoor antenna, move the unit away from the TV. The unit does not operate correctly. Take out the batteries and insert them again (page 9). Please note that recorded messages may be erased during servic...