Évaluations - 5, GPA: 4.2
(
)
)
|
Facilité d'utilisation
. The LED background light will turn on when any of the 3 buttons are pressed. Recommended temperatures for chilling wine: Red Wine: 54-64°F (12-18°C) Port/Sherry: 50-57°F (10-14°C) White/Rose Wines: 46-54°F (8-12°C) -3- Cleaning instructions: Below is a list of general cleaning tips that should be noted when cleaning your wine cooler. When cleaning your cooler, be cautious when using any type of cleaning products, some individuals may have allergic reactions to the chemicals in some of these products. By using solvents to clean your cooler, you may damage its finish, hence it is recommended to use mild detergents, baking soda and water. Never spray or squirt any type of liquid onto your cooler. If a spray is needed, spray the liquid onto a cloth and then use the moistened cloth to rub down the cooler. • Always unplug the wine cooler before cleaning. • Wash the inside surface with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart (1 liter) of water. • Wash the racks with a mild detergent solution. • The outside of the wine cooler should be cleaned with a mild detergent solution. • Always dry all the parts with a clean dry cloth before plugging the wine cooler back into the receptacle. AVOID ABRASIVE PRODUCTS SUCH AS SCOURING PADS AND POWDERS. THEY WILL PERMANATELY DAMAGE THE FINISH OF YOUR WINE COOLER In addition to the cleaning tips listed above it is recommended to clean the external fan filter of your wine cooler every 6 months as dirt, dust and hair can build up causing the cooling system to not function as efficiently. ALWAYS UNPLUG THE UNIT FROM THE WALL PRIOR TO CLEANING THE FAN FILTER There are 2 effective methods to clean the external fan filter of your wine cooler: • A vacuum cleaner can be used collect the dirt, dust and hair that has built-up. • Alternatively compressed air in a container can be used to clean the fan filter of your wine cooler. Be sure to follow the directions of the compressed air container to avoid damage or personal injury. Interior Light Information: The interior light source of the wine cooler consists of LED lighting which is long lasting and very energy efficient. LED lights will usually last for many years, even sometimes lasting longer than the product they have been installed in. If for any reason the LED lights stop working and you have determined that they no longer functions, please contact our customer service department toll-free at 1-800-898-9020 to find a local service center. -4- Troubleshooting Guide: You can easily solve many common problems by trying the suggestions below: SYMPTOM POSSIBLE CAUSE Vibrations • Check to make sure the wine cooler is on a level surface. The door will not close properly. • The wine cooler is not on a level surface. • The racks are out of position. Fan is always running. • This is simply a function of the cooling system. The lower the setting, the more the fan will run. If the room is warmer than 77°F (25°C), it will run more. • The unit has been designed to run continuously when operating at the lower temperatures. Unit has no power. • Check the wall outlet for power. Make sure the outlet is not controlled by a wall switch. The inside temperature does not seem correct. • Make sure the cooling vents on each side of the cooler are not obstructed. Have at least 5 inches (15cm) of space on each side of unit. • The unit will have difficulty in cooling if the set temperature is 32°F (0°C) below the ambient temperature. Example: if the ambient temperature is 86°F (30°C), the unit will have difficulty cooling to 54°F (12°C). • When using the unit for the first time, it can take up to 24 hrs to reach the desired temperature. The unit does not • It may not be plugged into the wall socket. operate. • Make sure the wall socket is functional by testing another electrical appliance in the power socket. • Make sure the circuit breaker is not tripped or a fuse is blown. The unit will not cool. Make sure there are at least 3-5 bottles in the unit. Power is On. Allow at least 24 hours for the internal temperature to adjust properly. *Because of technological limitation , the interior temperature can be set between 54°F (12°C) and 66°F (19°C) on the control panel only at the room temperature of 77°F (25°C). To achieve accurate temperature control, the unit should not be used or operated in any of the following locations: • in a sunny place. • in a room with poor air circulation such as a garage. • near another heat producing appliance (dishwasher, oven, refrigerator). • with an outlet shared with a refrigerator as it will drain power from the unit. • built-in a wall recess, niche or cabinet. • in a cabinet or closet. And remember to have at least 5 inches (15 cm) of space on each side of unit. -5 General Statements • The unit can be manually set using the and buttons The minimum setting is 54°F (12°C) and maximum is 66°F (19°C). • The unit does not use any CFC’s. There is no compressor inside...