Évaluations - 5, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Use of 8 oz glasses is recommended to maintain the ideal serving temperature. Draught and Drink * Be aware that the first glass you pour from every new DraughtKeg will contain mostly foam. This is typical of draught beer. Allow the foam to settle and continue to pour. * Tilt and pour: Tilt your glass at a 45 degree angle as you pour and adjust upright as the glass fills. * Ensure you pull the tap handle all the way down. Not opening the handle all the way will result in excessive foam. * For the optimal draught beer drinking experience, serve your beer with a foam head of 2 fingers in height (approximately 1.5”). B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 11 ENGLISH 12 ENGLISH Proper Care and Cleaning of your BeerTender® * The drip tray and grate should be emptied and cleaned after each use. * Before cleaning the appliance, it is essential to turn off the ON/OFF switch and then pull the plug out of the socket. * Keep in mind that during use the drip tray will have to be emptied and rinsed regularly. The tray and grate are dishwasher safe or can be washed by hand with a mild detergent. Dry completely. * Always wipe down the interior of the BeerTender after use. Beer is a natural product that can spoil. Therefore, you should always keep the appliance clean to maintain the quality of the beer dispensed and avoid unpleasant odors. * Rinse the pour spout between uses for optimal results. Handwash with warm soapy water. Do not wash in dishwasher. * To remove, unscrew turning counterclockwise from main unit. To re-attach, simply screw back in place turning clockwise. * You should never attempt to access internal parts of the appliance. IMPORTANT: After cleaning, ensure all parts of your BeerTender have completely dried before closing the lid. Storing the BeerTender * When the BeerTender is not being used for a long period of time, remove the DraughtKegTM and turn the control to “off”. * Remove the plug from the power outlet. * Store the BeerTender at room temperature in a dry place out of children’s reach. * Protect from dust and dirt. B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 12 13 ENGLISH ENGLISH 13 6 Troubleshooting Problem Possible causes Remedies The appliance does not come on. The appliance is not connected to the outlet. Connect the appliance to the outlet. You cannot position the tap cover correctly. You may have opened the draught beer tube (white plastic part at the end of the serving tube) by hand. If so, the tap cover will not close correctly and there is a risk for the beer to flow out. Before installing the draught beer tube onto the BeerTender® tapping mechanism, make sure that the draught beer tube is closed. You cannot position the tap cover correctly. The DraughtKegTM tap or tube is not inserted correctly. If the draught beer tube is not installed properly in the tapping mechanism or if the tube is pinched, this will affect the beer flow. Please refer to Section 5: Using the BeerTender System to check that you have properly set up the BeerTender. No beer is being dispensed. The appliance is off. Switch the appliance on. B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 13 14 ENGLISH No beer is being dispensed. The DraughtKegTM is empty. Replace the DraughtKeg with a new one. There is no DraughtKeg inside the BeerTender® appliance. Install a DraughtKeg inside the BeerTender appliance. The BeerTender appliance tap handle is not correctly installed/positioned. Install/position the tap cover correctly. You cannot close the lid. The tap cover has not been positioned correctly. Position the tap cover correctly. You cannot close the lid. The DraughtKeg has not been correctly installed. Install the tap correctly. Ensure the draught tube has been installed completely and is not preventing the lid from closing. The BeerTender appliance produces too much foam when dispensing beer. The DraughtKeg has not reached the right dispensing temperature. Allow the DraughtKeg to cool to the right temperature. You can rely on the temperature indicator on the control panel of your BeerTender appliance. The DraughtKeg has been shaken. Wait 4 hours before dispensing beer. The tap handle is being moved too slowly. Firmly and quickly pull the handle down and forward as far as it will go. B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 14 15 ENGLISH Beer flows out too slowly. The tap handle is not open all the way. Open the tap completely. The BeerTender® appliance is dispensing warm beer. The DraughtKegTM has not been chilled long enough and is thus not at the right serving temperature. Allow the DraughtKeg to cool long enough in the appliance. The temperature indicator on the control panel does not light up. The BeerTender appliance is exposed to too hot a temperature or direct sunlight (see also section 5: Cooling the keg and Installing the BeerTender). Use th...
Ce manuel est également adapté pour les modèles :Dispensers - BeerTender (147.67 kb)