Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
period stated above. If any such part fails during the period of warranty a. Fuel Metering System coverage, the part will be repaired or replaced by B&S at no charge to the • Cold start enrichment system (soft choke) owner. Any such part repaired or replaced under the warranty will be warranted for the remaining warranty period. • Carburetor and internal parts • Fuel pump • Any warranted part that is scheduled only for regular inspection in the owner’s manual supplied, is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining • Fuel line, fuel line fittings, clamps • Fuel tank, cap and tether warranty period. • Carbon canister • Any warranted part that is scheduled for replacement as required maintenance b. Air Induction System in the owner’s manual supplied, is warranted for the period of time prior to the • Air cleaner first scheduled replacement point for that part. If the part fails prior to the first • Intake manifold scheduled replacement, the part will be repaired or replaced by B&S at no • Purge and vent line charge to the owner. Any such part repaired or replaced under warranty will be c. Ignition System warranted for the remainder of the period prior to the first scheduled replacement point for the part. • Spark plug(s) • Magneto ignition system • Add on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non exempted add on or modified parts by the d. Catalyst System owner will be grounds for disallowing a warranty claim. The manufacturer will • Catalytic converter not be liable to warrant failures of warranted parts caused by the use of a non • Exhaust manifold exempted add on or modified part. • Air injection system or pulse valve 3. Consequential Coverage e. Miscellaneous Items Used in Above Systems • Vacuum, temperature, position, time sensitive valves and switches Coverage shall extend to the failure of any engine components caused by the • Connectors and assemblies failure of any warranted emissions parts. 2. Length of Coverage 4. Claims and Coverage Exclusions For a period of two years from date of original purchase, B&S warrants to the original purchaser and each subsequent purchaser that the engine is designed, built, and Warranty claims shall be filed according to the provisions of the B&S engine equipped so as to conform with all applicable regulations adopted by the Air warranty policy. Warranty coverage does not apply to failures of emissions parts Resources Board; that it is free from defects in material and workmanship that could that are not original equipment B&S parts or to parts that fail due to abuse, neglect, cause the failure of a warranted part; and that it is identical in all material respects to or improper maintenance as set forth in the B&S engine warranty policy. B&S is not the engine described in the manufacturer’s application for certification. The warranty liable for warranty coverage of failures of emissions parts caused by the use of period begins on the date the engine is originally purchased. add-on or modified parts. Look For Relevant Emissions Durability Period and Air Index Information On Your Engine Emissions Label Engines that are certified to meet the California Air Resources Board (CARB) Emissions Standard must display information regarding the Emissions Durability Period and the Air Index. Briggs & Stratton makes this information available to the consumer on our emissions labels. The engine emissions label will indicate certification information. The Emissions Durability Period describes the number of hours of actual running time for which the engine is certified to be emissions compliant, assuming proper maintenance in accordance with the Operating & Maintenance Instructions. The following categories are used: Moderate: Engine is certified to be emissions compliant for 125 hours of actual engine running time. Intermediate: Engine is certified to be emissions compliant for 250 hours of actual engine running time. Extended: Engine is certified to be emissions compliant for 500 hours of actual engine running time. For example, a typical walk-behind lawn mower is used 20 to 25 hours per year. Therefore, the Emissions Durability Period of an engine with an intermediate rating would equate to 10 to 12 years. Briggs & Stratton engines are certified to meet the United States Environmental Protection Agency (USEPA) Phase 2 emissions standards. For Phase 2 certified engines, the Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirements. For engines less than 225 cc displacement. Category C = 125 hours , Category B = 250 hours , Category A = 500 hours For engines of 225 cc or more displacement. Category C = 250 hours , Category B = 500 hours , Category A = 1000 hours BRIGGSandSTRATTON.COM Generelle oplysninger I...
Ce manuel est également adapté pour les modèles :Dispensers - VANGUARD 290000 (4.37 mb)
Dispensers - VANGUARD 300000 (4.37 mb)
Dispensers - VANGUARD 350000 (4.37 mb)