Log:
Évaluations - 1, GPA: 5 ( )

Instructions Danby, Modèle DWC518BLS

Fabricant : Danby
Taille : 307.19 kb
Nom Fichier : 5b2872bd-42d1-4e4e-a414-cde364a72264.pdf
Langue d'enseignement: enfr
Aller à la télécharger



Facilité d'utilisation


Do not use an adapter plug with this appliance. Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service technician install an outlet near the appliance. 4 Operating Instructions Features of your Wine Cooler 6 4 1 2 7 5 3 9 1. Tempered Glass Door: Tinted for UV protection while still allowing for easy interior viewing. 2. Electronic Display and Controls: For viewing and regulating the temperature of the wine cooler. 3. Magnetic Door Gaskets: Tight fitting seals retain all the cooling power and humidity levels. 4. Wood roller-shelves with stainless steel trim. 5. Child Proof Lock with Key 6. Front Mounted Exhaust: Allows for integrated (built-in) applications. 7. Leveling Legs. 8. Interior Light (not shown): Illuminates the compartment when the door is opened. 9. Interior Light Toggle Switch: To manually illuminate/extinguish the interior lights, while door remains closed. 5 Operating Instructions The Controls of your Wine Cooler CFCFRUN Activation Upper chamber CHAMBRE SUPERIEURE Lower chamber CHAMBRE INFERIEURE Set Upper REGLER SUPERIEURE Set Lower REGLER INFERIEURE 1 2 3 4 5 1. Run: Indicator light illuminates to signify that the cooling mode is currently in operation. 2. Upper chamber display: Display screen shows current cabinet temperature and set temperature of the upper zone. 3. Lower chamber display: Display screen shows current cabinet temperature and set temperature of the lower zone. 4. °C/°F: Adjacent indicator light denotes which scale of temperature is displayed. 5. ‘Set Upper’ button: Used to set the temperature in the upper zone (see ‘Setting the Temperature’ below). ‘Set Lower’ button: Used to set the temperature in the lower zone (see ‘Setting the Temperature’ below). Setting the Temperature IMPORTANT! In the event of a power failure, wait 3 to 5 minutes before restarting. • To switch the display • You may view your ‘set’ tem- between the Fahrenheit (°F) perature at any time by briefly and Celsius (°C) scale, depressing either the ‘Set depress the ‘Set Upper’ and Upper’ or ‘Set Lower’ button. ‘Set Lower’ control buttons The set temperature will flash simultaneously for approxiin the display area for 5 secmately five (5) seconds. onds before the display resumes showing the current • The temperature range can cabinet temperature. be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific wine storage requirements. Each depression of the ‘Set Upper’ or ‘Set Lower’ button will allow you to adjust the temperature in 1° increments within the aforementioned range. 6 Operating Instructions Wine Storage The *maximumcapacity of the DWC518BLS is 51 (750ml) wine bottles. *When stocked as per instructions In order to achieve the maximum storage capacity of fifty-one (51) bottles, it will be necessary to position the bottles alternately on the upper five (5) shelves, as shown in Fig A Fig A. This will allow for the storage of nine (9) 750 ml bottles per shelf in each of the top five shelves, and six (6) bottles on the bottom shelf (Fig B), for a total storage capacity of fifty-one (51) wine bottles. Fig B Shelf Instructions IMPORTANT! Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air circulation within the cabinet. To remove a roller-shelf (Fig.C): 1. Gently slide the shelf outward until it meets resistance. 2. Tilt the shelf slightly upwards (approximately 15°) and carefully remove the shelf by sliding it outward from the cabinet. Fig. C 1 2 15° To reinstall a roller-shelf: 1. Set the shelf’s wheels upon the front of the wheel track. 2. Tilt the front of the shelf slightly upwards (approximately 15°), and begin to gently slide the shelf into the cabinet until the shelf’s roller- wheels slide naturally within the wheel track. To remove the bottom shelf: 1. Grasp the top, wooden area of the shelf with your hand. 2. While grasping the shelf, gently apply upward pressure to the back of the shelf and downward pressure to the front of the shelf. 3. Begin to slowly pull the shelf outward until it unhooks from the stoppers, and then remove the shelf from the cabinet. To reinstall the bottom shelf (Fig. D): 1. Slide the shelf beneath the track that is directly above the track you want the shelf to rest on. 2. Once the back-end of the shelf is in contact with the back wall of the cabinet, lower the shelf onto the track. 1 2 Fig. D 7 Installation Instructions - Intergrated Application Tools you will Need Drill & Hole Saw set GlovesSafety Glasses Carpenters Square Measuring Tape Level Flashlight FOR YOUR SAFETY: While performing installations described in this section, gloves, safety glasses or goggles should be worn. Preparing the Enclosure Electrical Requirements: The appliance must be connected to an individual properly grounded electrical outlet, protected by a 15 or 20 ampere circuit breaker or time delay fuse. • It is recommended that you do not install the wine cooler ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories