Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE BUILDING PLUMBING SYSTEM. INSTALLATION INSTRUCTIONS 1. Familiarize yourself with the components of the drinking fountain. 2. Determine location of rough-in and plumbing connections. Mount hanger bracket(s) to wall at desired height. 3. Install fountain to wall. Install additional fasteners to bolt fountain securely to wall. 4. Connect strainer to water supply (service stop). Refer to figure 5. DO NOT SOLDER TUBES INSERTED INTO THE STRAINER AS DAMAGE TO THE O-RINGS MAY RESULT. Connect trap to waste stub and fountain. 5. Turn on water supply and check for leaks at all plumbing and drain connections. Fix all leaks as required. PAGE 1 98129C (3/05) EDF210C / EDF310C FOUNTAIN FIG. 1 ROUGH - IN DIMENSIONS EDF210C (TWO STATION) FIG. 2 ROUGH - IN DIMENSIONS EDF310C (THREE STATION) 98129C (3/05) PAGE 2 13 14 14 14 15 20 22 13 14 14 14 15 20 22 EDF210C / EDF310C FOUNTAIN 1 5 6 7 9 ITEM NO. PART NO. DESCRIPTION 1 56073C Bubbler Assy. 2 40169C Hex Nut 3 40048C Button 4 40089C Cover 5 40322C Orifice Assy. 6 56011C Bubbler Housing 7 55997C Pedestal 8 61313C Regulator 9 75580C Locking Nut 10 45336C Strainer/Ferrule Assy. 11 50074C Gasket - Tailpipe 12 28568C Fountain 13 55996C Strainer 14 56092C Polytubing 15 70682C Tee - 1/4 16 45852C Trap Assy. 17 45853C Wasteline Tee Assy. 18 45854C Tailpipe 19 15005C Regulator Retaining Nut 20 28580C Hanger Bracket 21 50986C Regulator Holder 22 45855C Wasteline 1/4" O.D. TUBE WATER INLET TO COOLER FIG. 5 ITEMIZED PARTS LIST 3/8" O.D. UNPLATED COPPER TUBE CONNECT COLD WATER SUPPLY BUILDING WATER INLET NOTE: WATER FLOW SERVICE STOP (NOT FURNISHED) DIRECTION FIG. 6 PAGE 3 98129C (3/05) 2, 3, 4, 8, 19, 21 10, 11 10, 11 18 17 16 14 FIG. 4 FIG. 3 1 - SEE FIG. 3 12 EDF210C / EDF310C FOUNTAIN ITEMIZED PARTS LIST ITEM NO. PART NO. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 12 2, 3, 4, 8, 19, 21 FIG. 7 56073C Bubbler Assy. 40169C Hex Nut 40048C Button 40089C Cover 40322C Orifice Assy. 56011C Bubbler Housing 55997C Pedestal 61313C Regulator 75580C Locking Nut 45336C Strainer/Ferrule Assy. 50074C Gasket - Tailpipe 28569C Fountain 55996C Strainer 56092C Polytubing 70682C Tee - 1/4 45852C Trap Assy. 45853C Wasteline Tee Assy. (Vertical) 45854C Tailpipe 15005C Regulator Retaining Nut 28580C Hanger Bracket 50986C Regulator Holder 45857C Wasteline (J-Tube) 45858C Wasteline (Straight) 45856C Wasteline Tee Assy. (Horizontal) 18 24 10, 11 10, 11 2020 2, 3, 4, 8 18 10, 11 17 22 23 16 14 14 14 14 14 14 13 17 15 TROUBLE SHOOTING AND MAINTENANCE Orifice As...
Ce manuel est également adapté pour les modèles :Dispensers - Fountains with Flexi-Guard EDF210C (55.54 kb)