Évaluations - , GPA:
(
)
)
Fabricant : Channel Plus
Taille : 989.74 kb
Nom Fichier : 8a3460f8-a439-499e-a92c-2b3be9dd788f.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Any change or modification to this device without the permission of Linear LLC may void the user's authority to operate this equipment. Linear® (760) 438-7000 USA & Canada (800) 996-5225 Toll Free FAX (800) 468-1340 OVERVIEW The SVC-10 is a complete audio/video/IR over CAT-5 tranmission system. Each SVC-10 includes a rack-mountable transmitter and a small receiver unit. The SVC-10 can transmit either composite video or S-video and either Pro-logic encoded analog stereo or Digital audio. The SVC-10 transmitter can be adjusted to compensate for CAT-5 cable losses up to 1000 feet. In addition, an IR target can be used with the receiverto control the remote source. CONTROLS AND CONNECTIONS Transmitter Front Power LED is always lit when unit powered • Shows either composite or s-video source ■ LED lit when transmitting digital audio ■ LED flashes during IR data transmission ■ Digital audio coax output (loop-through) Right analog audio output (loop through) Left analog audio output (loop through) Composite video output (loop through) S-video output Transmitter Back Power supply Input Left analog audio input Right analog audio input Digital audio coax input Digital optical audio Input • Power LED lit while unit powered ■Flashes during IR transmission Receiver Front IR emitter ports (2) CAT-5 output Cable length adjust S-vldeo input Composite video input IR target input» CAT-5 input1 S-video output- Receiver Back Power supply input Left analog audio output Right analog audio output Digital audio coax output Composite video output 2 FEATURES EASY WIRING The SVC-10 transmitter and receiver communicate over a single run of CAT-5 wire. A back panel control is on the transmitter to allow compensation for any length of wire up to 1000 feet. Wire RJ-45 connections according to TIA T568A standard. FLEXIBLE VIDEO INPUT Choose between s-video input or composite video. The SVC-10 has its own connector for each - no need for a converter plug. UNIVERSAL AUDIO The SVC-10 accepts either left&right analog audio or digital audio. It can handle either coax or fiber optic (TOSLINK) digital audio. When using the fiber optic cable, the SVC-10 converts this signal and puts it on the coax digital loop out connector. When using analog audio, the SVC-10 will maintain Dolby Prologic® encoding if present. LOOP OUT CONNECTORS All SVC-10 connectors have built in loop through connectors for a second device such as a local monitor. ACTIVE TERMINATE FEATURE The SVC-10 terminates the inputs into a 75 ohm load. When a second cable is connected to the output, the SVC-10 automatically disconnects this termination to allow the second device to provide the termination. IR CONTROL Standard 12 volt ChannelPlus IR targets and emitters can be used with the SVC-10 to allow control of the source from the remote location. MOUNTING The SVC-10 can be mounted in standard 19” racks by attaching the included mounting ears. Remove the rubber feet on the bottom of the unit to ensure clearance when inserted into a rack. 3 Sample System Diagram 1: Transmitting video and analog audio from a DVD 800 feet Sample System Diagram 2: Transmitting composite video and analog audio from a VCR 350 feet with IR Connect a local monitor here Connect a local receiver here NJHho Set LENGTH ADJUST to 350 000 Pro-logic Surround Sound Processor 5 Sample System Diagram 3: Transmitting S-video and DTS from a DVD 600 feet with IR Connect a local monitor here Connect a local receiver here /£*» Set LENGTH ADJUST to 600 1000 Digital Surround Sound Processor 6 FREQUENTLY ASKED QUESTIONS Q: Can I transmit composite video from one source and s-video from another source at the same time? A: No, the SVC-10 can only handle either composite or s-video -not both. Q: Can I connect a CD player’s left&right analog outputs and the digital coax from a DVD to the SVC-10? A: Yes, but only one device can be used at a time. If you are transmitting digital audio, make sure your CD player is off. Likewise, if you are using the CD player, make sure the DVD player is off. Q: What happens if I use both the coax digital and optical connector at the same time? A: The coax digital always overrides the optical signal. When the coax digital connector is plugged into the unit, the optical signal is ignored, even if there is no signal on the coax cable. Q: Can the SVC-10 transmit farther than 1000 feet? A: Yes, but the system only compensates for up to 1000 feet. The SVC-10 is optimized for lengths from 0 to 1000 feet. Operating beyond this is possible but not recommended. Q: Can I expand the SVC-10 using an expansion panel to connect several receivers to a single transmitter? A: No, the SVC-10 system is designed to work point-to-point. It is not designed to be expanded at this time. Q: What digital formats is the SVC-10 compatible with? A: All commonly available formats such as PCM, Dolby Digital® (AC-3), Dolby Digital Surround EX®...