Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Step 3: Access the MAX Admin Menu Once the boot-up process is complete, the MAX Admin Menu (FIG. 3) is displayed: FIG. 3 MAX Admin Menu Working With the MAX Admin Menu • Use the arrow keys on the keyboard to highlight the desired option, and press Enter to make a selection. Do not use the arrow keys on your keyboard’s numeric keypad. • Beyond this menu, press the TAB button to navigate through the elements on the pages until an asterisk appears next to the desired selection. • Press the spacebar to make a selection (press again to de-select). • For detailed descriptions of all options in the MAX Admin Menu, refer to the MAX Servers Instruction Manual. Step 4: Add MAX-AVPs, AVMs and AOMs to the HT Server Before you can use MAX-AVP Audio-Video Players MAX-AVM or MAX-AOM modules, they must each first be added to the server, via the Output Module Setup options in the MAX Admin Menu. You should add the modules/players to the server before making any physical connections. Adding MAX-AVP Players and/or MAX-AVM Modules Complete these steps for each MAX-AVM Audio-Video module and/or MAX-AVP Audio-Video Player that you want to add to the MAX-HT: Note: HT Servers treat MAX-AVPs exactly the same as MAX-AVMs, and the process of adding them is identical. 1. In the MAX Admin Menu, select: Output Module Setup > Add Output Module > AVM. 2. In the Enter Output Number field, specify the output on the server that you want to assign to this AVP or AVM (range = 1 - 33). Each AVP/AVM requires one output. Select OK to proceed. Note: The server will not allow you to assign a module to an output/zone that is already in use. Select Output Module Setup > View to review the current output/zone assignments. 3. In the Enter Serial Number field, enter the Setup Serial (Key) Number. This number is printed on a decal located on the bottom of each AVM/AVP enclosure. The system will notify you that the AVP (or AVM) has been added to the system. Note: AVMs use a Setup “Serial” Number; AVPs use a Setup “Key” Number. 4. Select OK to return to the Output Module Setup menu, select OK again to return to the main menu. 5. Select Restart MAX daemon. Adding MAX-AOM Audio-Only Modules Complete these steps for each MAX-AOM module that you want to add to the HT: Note: When connecting USB cables to the HT server, always plug into the USB 1 port first. The USB 1 port is located on the right side of the rear panel (see FIG. 1). 1. In the MAX Admin Menu, select Output Module Setup > Add Output Module > AOM. 2. In the Enter Output Number field, specify the first of up to 4 outputs on the server that you want to assign to this AOM (range = 1 - 33). Each AOM requires up to 4 server outputs to accommodate the 4 audio output/ zones provided by each AOM. Since the MAX-HT12 supports two AOMs (one on each USB port), you can assign up to 8 server outputs. Select OK. 3. In the Enter USB Port Number field, enter the number of the USB port (1 or 2) on the server that this MAX-AOM will be physically connected to. Select OK. 4. In the Enter AOM Output Number field, specify which audio output/zone on the MAX-AOM (1-4) you are adding to the specified server output. Select OK. 5. A message is displayed to notify you that the AOM module has been added to the system. Select OK to return to the Output Module Setup menu. Repeat these steps to assign each of the AOM’s four audio output/zones to a USB port and Output number on the server. Notes: Always assign 4 consecutive server outputs to each MAX-AOM, even if you don’t plan to use all of the AOM’s outputs right away. Assign the 4 server outputs (per AOM) starting either with output #1 (if there are no AVPs/AVMs on this server), or immediately after the last output assigned to an AVP or AVM. To avoid potential confusion later, do not mix AOM outputs and AVP/AVM outputs on the server. 6. Select Restart MAX daemon. Step 5: Connect the Modules To the HT Server Once the AVP players and AVM/AOM modules have been added to the server via the MAX Admin Menu, you can physically connect them to the server: Connecting MAX-AVPs and/or MAX-AVMs Note: Multiple AVMs/AVPs require a GB Ethernet switch (not included). 1. Connect the audio outputs, using either one of two options: a. Use a mini-stereo to RCA adapter for analog audio output b. Use a coaxial cable for digital audio output 2. Use a S-Video cable to connect the video output on the AVM or AVP to a display device (MAX-AVMs also support VGA connections). 3. Use ethernet cables to connect the ethernet port on the AVM or AVP to a GB ethernet switch (not included), and the GB ethernet switch to the A/V OUT connector on the server. 4. Connect the included power supply. 5. Push the power button on the front panel of the AVM, and allow up to one minute for the module to boot up. On the AVPs, the power switch is on the rear panel. Note: Power up the MAX-HT before applying power to the AVP(s) and/or AVM(s). Connecting MAX-AOM Modules Note: Do not use a USB hub with MAX-HT servers or AOM modules....
Ce manuel est également adapté pour les modèles :Home cinéma - HT12 (232.43 kb)