Évaluations - 4, GPA: 3.8
(
)
)
|
Par ce dispositif a également d'autres instructions :
Haut-parleurs et caissons de basse - SCHTB520 (866.97 kb)
Facilité d'utilisation
This unit does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI AV IN or HDMI AV OUT), this unit will not operate correctly. Turn this unit off, disconnect the AC power supply cord and reconnect the HDMI cable(s). (.. 15, 16) VIERA Link related operations no longer function properly. . Check the “VIERA Link” setting on the connected devices. . Have you turned the VIERA Link settings off? . When the HDMI connections are changed, after a power failure or after the AC power supply cord has been removed, VIERA Link operations may not function properly. jTurn on all the devices that are connected to the TV with an HDMI cable and then turn the TV on. jTurn off the VIERA Link settings and turn it on again. For details refer to the Owner’s Manual for the TV. jWhile this unit and the TV are connected with the HDMI cable, turn on the TV and then remove this unit’s AC powers supply cord and reconnect it again. The first few seconds of audio cannot be heard when using the HDMI connection. This may occur during DVD-Video chapter playback. Change the digital audio output setting on the connected device from “Bitstream” to “PCM”. To return to the factory preset. While this unit is on, press [POWER I/I] on this unit for more than 4 sec. (All the indicators will blink twice when the unit is reset.) If this unit does not operate as expected, return the settings to the factory preset. General operation D HDMI 22 If operations become unstable when connected to a non-Panasonic HDMI compatible device, connect using an optical digital audio cable. (.. 15) Turn VIERA Link off. 1 Press and hold [MUTE] on the remote control and [VOLUME s] on this unit for more than 2 sec. . The setting is changed when the , DTS and PCM indicators blink. 2 After the setting has changed, turn off and then on all the connected devices. . To reset the setting, return to the factory preset. (.. 21) . When VIERA Link is turned off the ARC function is not available. Be sure to connect the optical digital audio cable. (.. 15) No sound (or image). . Turn muting off. (.. 18) . Check the connections to the other devices. (.. 15, 16) . Make sure that the received audio signal is compatible with this unit. (.. 23) . Turn this unit off and then on again. . If this unit is connected to the TV with an HDMI cable. Make sure that the TV’s HDMI terminal is labeled “HDMI (ARC)”. If not, connect using the optical digital audio cable. (.. 15) . If this unit is connected to a Panasonic TV and this unit is turned on using the button on this unit or the remote control, sound might not be output from this unit’s speakers. In this case, turn this unit on using the TV’s remote control. (.. 20) . If the connections are correct, there might be a problem with the cables. Reconnect the unit with different cables. . Check the audio output settings on the connected device. . When the and DTS indicators blink and there is no audio output from this unit, turn the unit off, remove the AC power supply cord and consult you dealer. . If the BD/DVD indicator flashes and there is no audio output, try the following. 1 Turn the connected device off and then on. 2 Turn off this unit, remove the HDMI cable, then reconnect the HDMI cable and turn this unit back on. DTS audio cannot be output from this unit. Make sure that the digital audio output setting on the connected device is set to “Bitstream”. The audio output cannot be changed from main to secondary. If the digital output setting of TV or player is set to “Bitstream” change the audio output on this unit. 1 Press and hold [BD/DVD] for more than 2 sec. 2 While the indicator of the current setting is flashing, press [BD/DVD] to change the setting. A Main and secondary B Main C Secondary (SAP: Secondary Audio Program) . The setting is maintained until it is changed again. The volume is lowered when the unit is turned on. If this unit is turned off with the volume setting in the greater half (above 50), this unit will automatically lower the volume to the middle (50) when the unit is turned on. To turn off this function: 1 Press and hold [MUTE] on the remote control and [VOLUME r] on this unit for more than 2 sec. . The setting is changed when the , DTS and PCM indicators blink. . To reset the setting, return to the factory preset. (.. 21) The audio from the TV is distorted. Change the TV’s digital audio output settings to “Bitstream”. The dialog is too persistent or the dialog does not sound natural. This unit has a function to make the dialog stand out when the volume is low. To turn off this function: 1 Press and hold [TV] on the remote control and [VOLUME s] on this unit for more than 2 sec. . The setting is changed when the , DTS and PCM indicators blink. . To reset the setting, return to the factory preset. (.. 21) Sound D D TV BD/DVD D DTS PCM A B C D D Reference 23 There is no audio. The power of the unit turns off automatically. (When this unit detects a problem, a safety measure is activated and this...