Évaluations - 3, GPA: 3.3 ( )

Fabricant : Bose Taille : 2.61 mb Nom Fichier : Langue d'enseignement:

Photos et spécifications   Bose  LIFESTYLE V35

Follow the on-screen instructions. System doesn’t do anything • Make sure the AC power cord is inserted securely into the power supply. • Make sure the Acoustimass® module and the power supply are fully plugged into a live AC (mains) outlet. • Select a connected device from the SOURCE menu. • Reset the system. See “Resetting the system” on page 24. No sound • Make sure the Acoustimass module is plugged into a live AC (mains) outlet. • Increase the volume. • Press the Mute button ( ) and make sure your system is not muted. • Check the input connections on the control console. Make sure that you have selected the right source. • Make sure that the audio input cable is firmly plugged into the Acoustimass connector on the control console and the other end is firmly seated into the Media Center connector on the Acoustimass module. • Check connections between the front and rear speakers and the Acoustimass module. • For radio operation (V25 and V35 systems only), connect the FM and AM antennas. • Reset the system. See “Resetting the system” on page 24. 22 CARE AND MAINTENANCE TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English Sound is marred by a loud hum or buzz, which may be electrical in nature (not harmonic) • Contact Bose® Customer Service to determine if and how other electrical devices in the room may be creating unwanted signals, and to obtain possible remedies. No sound from center speaker • Make sure the center speaker cable is connected at both ends. • Set the Speakers option to Front(3) or Surround(5) in the OPTIONS menu. • In the OPTIONS menu, make sure the Sound setting is not Original. Center speaker is too loud • Decrease the Center Speaker volume setting in the OPTIONS menu for the current source. No sound from rear speakers • Make sure the Speakers option is set to Surround(5) in the OPTIONS menu. • Increase the Rear Speakers setting in the OPTIONS menu for the current source. • Make sure the video sound source is stereo-encoded or surround-encoded, and the device used (DVD, VCR, DVR, etc.) is stereo. • For stereo inputs, make sure the Sound option is set to Recommended or Alternative. Rear speakers are too loud • Decrease the Rear Speakers volume setting in the OPTIONS menu for the current source. • Make sure the left and right front speakers are connected to the front speaker jacks, and the left and right rear speakers are connected to the rear speaker jacks. Radio does not work (V25 and V35 systems only) • Make sure antennas are connected properly. • Move AM antenna at least 20 inches (50 cm) from the control console and Acoustimass® module. • Adjust antenna position to improve reception. • Make sure the AM antenna is in an upright position. • Move antennas farther from control console, TV, or other electronic equipment. • Select another station. You may be in an area of weak signal coverage for some stations. FM sound is distorted (V25 and V35 systems only) • Adjust antenna position to reduce interference. • Fully extend the FM antenna. Problem What to do 23 CARE AND MAINTENANCE English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 FM sound is noisy when Speakers option is set to Front(3) or Surround(5) (V25 and V35 systems only) • Weak FM stations will produce static in the rear speakers. Set Speakers option to Stereo(2) in the OPTIONS menu to minimize noise. Sound is distorted • Make sure speaker cables are not damaged and the connections are secure. • Reduce the volume output level from any external devices connected to the control console. No sound from a connected device • Check the connections. • If using a coaxial or optical audio connection, make sure you have not made both types of connections to the same input on the control console. • Make sure that device is turned on. • Refer to the owner’s manual that came with the device. No TV picture, but audio is heard • Check the TV video input selection. Make sure it is correct for the video source. • Make sure video cables are securely connected. A connected device does not respond consistently to remote commands • Try connecting the included external IR emitter to the control console. For guidance, press the Setup button on the control console. Select the device options and follow the on-screen instructions. Intermittent audio dropouts heard on coaxial digital audio inputs • Contact Bose® Customer Service to request a composite video cable that can be used for the coaxial digital audio connection. Problem What to do 24 CARE AND MAINTENANCE TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English Resetting the system 1. Press and hold the power button on the control console for 5 seconds or until the power light on the control console changes to red. The power light on the control console changes to red when the system shuts down. 2. Press and release the power button on the control console to restart the system. The power light changes to blinking green and then solid green when the system is on and ready to use. 3. If you still cannot operate the ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :